Panasonic AG-HMC150 Gebruikershandleiding - Pagina 8
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Panasonic AG-HMC150. Panasonic AG-HMC150 35 pagina's. Avchd camcorder
Ook voor Panasonic AG-HMC150: Brochure & specificaties (8 pagina's), Informatie menu (20 pagina's), Brochure & specificaties (12 pagina's), Brochure (16 pagina's), Producthandleiding (22 pagina's), Basisinstructies (20 pagina's)
Pagina afdrukken
Other parts of the camera
Cold Shoe (a.k.a. accessory shoe)
Used to mount a light, microphone mount, wireless
receiver, or other gear on the camera. Avoid the
temptation to put a light here though, on-camera
lights annoy the people you are shooting and looks
at.
Tally Lamp
e tally lamps are illuminated during recording by
setting the REC LAMP item of the OTHER
FUNCTIONS menu to any setting other than OFF.
One is located on the front of the external
microphone and the other on the lower-left-hand side
of the back. e tally lamp will ash in any of the
following circumstances: the battery is low; the
Optical Image Stabilization is not working properly
( ashes 4 times per second); there's a problem with
the focus function ( ashes 4 times per second); the
battery capacity is very low ( ashes 1 time per
second); the memory card is almost full
( ashes 1 time per second).
Tripod Socket
e camera has a standard 1/4-20
(1/4" diameter, 20 threads per inch)
socket for attachment to a tripod. is
can also be used for attaching the
camera to custom made mounts. You
can nd compatible bolts at most any
hardware store. Make sure that any
bolt you get is not too long, you don't
want the bolt to bottom out in the
threaded socket and risk damaging the
socket or camera.
Lens and Lens Shade
Always keep the lens clean. If you need to clean the
lens, apply a drop of lens uid and then clean gently
with a crumpled piece of lens tissue. Never press on
the lens while cleaning, as a small grain of dirt could
easily scratch the lens. If you're not con dent with
lens cleaning, ask someone with experience to show
you how to do it. e lens shade is removable (the
lens shade attaches via a bayonet mount, turn gently
counter-clockwise to remove).
Introduction to the Panasonic AG-HMC150 AVCHD camcorder (rough draft)
Manual operation
When you rst start using the camera, it's a good idea
to run in automatic mode so you don't have to worry
about focus, exposure, white balance, and video gain,
however, once you become comfortable using the
camera, you'll want to start using the camera in
manual mode for the utmost in creative control over
the focus, exposure, and color characteristics of your
video clips. You'll nd that in the end, you are going
to do a better job with these settings once you get the
hand of it. With a lot of practice and practice, you'll
get good with these settings. So give yourself some
time, be patient with yourself, and take time to
practice, re ect, practice, re ect, and then practice
and re ect some more.
Switching to manual mode
Move the AUTO/MANUAL switch to the
MANUAL position to select the manual mode. e
"A" in the view nder or LCD monitor will disappear
(see gure below). Now you're in manual mode.
Manual focus controls
Manual focusing
Set the FOCUS switch to M (manual mode). Focus
by turing the focus ring. You can momentarily go
back to automatic focus by pushing the PUSH
AUTO button. Setting the FOCUS switch to in nity
causes the camera to focus on in nity and then
returns to manual focus after you've moved it to
in nity. Note: If you have set ON for the AF item on
the AUTO SW setting menu, auto focusing will
occur regardless of the position of the FOCUS switch
when the auto mode has been established.
Momentary auto focus
Even if you have switched FOCUS to M
(MANUAL) the camera will focus automatically
while you press down PUSH AUTO. is is handy if
you want to automatically focus but prevent the focus
http://kino-eye.com/dvb/
8 / 35