Panasonic AG-HPX250EJ Gebruiksaanwijzing - Pagina 24
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic AG-HPX250EJ. Panasonic AG-HPX250EJ 36 pagina's. Memory card camera recorder
Ook voor Panasonic AG-HPX250EJ: Elektrische aanpassing (20 pagina's)
Pagina afdrukken
The remote control
Insert the battery
1
Push the catch in the direction shown by
arrow 1 to remove the holder.
2
Insert the battery with the "+" marked side
facing up.
3
Return the holder to its original position.
• When the battery (CR2025) has run out, replace
it with a new one. (The battery lasts about one
year, depending on the frequency of use.) If the
remote control unit fails to work even when it
is operated near the camera-recorder's remote
control sensor, the battery has run out.
• Keep the battery out of the reach of children.
E-23
Remote control setup
When using two camera-recorders simultaneously,
set this camera-recorder and the remote control to
either "operation mode 1" or "operation mode 2"
so the remote control does not operate the wrong
camera-recorder by mistake.
Setting
• Wireless remote control
Press the operation buttons STOP () and STILL
ADV (
) at the same time to set the remote
control unit for use in "operation mode 1".
Alternatively, press the STOP () and STILL ADV
) buttons at the same time to set the remote
(
control unit for use in "operation mode 2".
When the battery in the remote control unit is
replaced, the remote control unit is set for use in
"operation mode 1".
• Camera-recorder
In the setup menus, OTHER FUNCTIONS
screen, REMOTE, set to 1 or 2. (Page 148 of Vol. 2)
If different settings are used for the camera-
recorder and remote control unit, "REMOTE" lights
in red on the viewfinder and LCD monitor.
Operation
mode 2
Operation
mode 1