Panasonic AGHVX200P - MEMORY CARD CAMCORDER Informatie menu - Pagina 18
Blader online of download pdf Informatie menu voor {categorie_naam} Panasonic AGHVX200P - MEMORY CARD CAMCORDER. Panasonic AGHVX200P - MEMORY CARD CAMCORDER 25 pagina's. Panasonic broadcast camcorder mechanical parts list
Ook voor Panasonic AGHVX200P - MEMORY CARD CAMCORDER: Onderdelenlijst (11 pagina's)
Pagina afdrukken
Setup menu list (continued)
DISPLAY SETUP screen
Item
ZEBRA DETECT 1
P2
TAPE
ZEBRA DETECT 2
P2
TAPE
MARKER
P2
TAPE
SAFETY ZONE
P2
TAPE
VIDEO OUT OSD
P2
TAPE
DATE/TIME
P2
TAPE
LEVEL METER
P2
TAPE
112
Display
mode
(Camera) Selects the brightness level of the left-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
(Camera) Selects the brightness level of the right-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF
<Note>
• The zebra patterns do not appear if you select OFF.
(Camera) Select ON to display the marker. (Page 43)
ON OFF
• To display the marker, press the ZEBRA button.
(Camera) Sets SAFETY ZONE to ON or OFF.
OFF , 90%, 4:3
(Camera)
Select ON to output the information displayed on the screen together with the
(MCR/
signals from the VIDEO IN/OUT jack.
VCR)
ON OFF
<Notes>
• When a tape is used for recording, no on-screen displays (OSD) will be output
while recording is underway even when this function has been set to ON.
However, OSD will be output to the 1394 output during recording standby. If
OSD is not required, set the function to OFF.
• If this option is set to ON when performing backup recording while a tape is
used, the OSD will be output to the 1394 output at all times except when the
unit is in the recording mode.
Bear in mind that the OSD may be recorded inadvertently if backup recording
is performed when a setting other than OFF is selected for the 1394
CONTROL option (page 114) on the OTHER FUNCTIONS screen.
(Camera)
Sets whether to display the date and time on the screen and whether to output
(MCR/
from the VIDEO IN/OUT jack.
VCR)
OFF:
The date and time are not displayed.
TIME:
The time is displayed.
DATE:
The date is displayed.
TIME&DATE:
The time and date are displayed.
• If you select any setting other than OFF, the date and/or time are included
in the output signals regardless of the VIDEO OUT OSD setting. (The OFF
setting can be selected also using the remote control. (Page 75))
(Camera)
Select ON to display the audio level meter.
(MCR/
ON OFF
VCR)
Description of settings
indicates the factory setting.