AquaScape Ultra 91008 Instructies en onderhoud - Pagina 5
Blader online of download pdf Instructies en onderhoud voor {categorie_naam} AquaScape Ultra 91008. AquaScape Ultra 91008 16 pagina's.
Ook voor AquaScape Ultra 91008: Installatie-instructies en onderhoud (16 pagina's)
• The Ultra
Water Pump includes an assortment of fi ttings
TM
for a wide variety of plumbing options. Select and install
the appropriate fi tting(s) for your application.
• The included Multi-Hose Adapter(s) is (are) designed to
accommodate different diameters of tubing and ideal for
applications using a single plumbing line.
• The Multi-Hose Adapter can be threaded directly into the
discharge of the pump.
• If using a diameter of pipe that is larger than the smallest
section of the Multi-Hose Adapter, trim off the smaller
sections to prevent fl ow restriction.
• The included threaded
FPT 90° elbow allows the
water fl ow to be directed
horizontally, perfect for
fountain basin applications
where vertical space is
limited.
• To install the elbow, attach
the included MPT Coupling
to the discharge of the pump.
Then thread the collared elbow fi tting to the MPT Coupling
to attach it to the pump.
• The collared connections allow the pump to be quickly
and easily disconnected from the tubing for pump removal
or maintenance.
aquascapeinc.com |
CAN 1-866-766-3426 |
• The convenient included 1/2" Valve (400/550/800) or
3/4" 3-Way Valve (1100/1500/2000) provide the ability to
customize fl ow rates.
• The included fl ow control
valve can be installed directly
into the pump discharge or
installed horizontally using the
threaded FPT 90° elbow.
• Once installed, simply adjust
the valve(s) to dial in the
desired water fl ow.
• When using the 3-Way Valve, close off any unused valves
to maximize water fl ow to the valves in use.
• Attach the tubing to the
selected fi tting(s) using a
twisting motion. If the tubing
fi ts loosely, a hose clamp
(not included) can be used to
secure the attachment.
• In some instances the tubing
may be diffi cult to attach to
the selected fi tting. If this
is the case, we recommend
heating the hose with a
hair dryer or simply dipping
the hose in very hot water
for a few seconds prior to
attachment. Lubrication can
also be used; we recommend
silicone grease or olive oil.
• Connect the other end of the
pump tubing to the decorative fountain or pond fi lter.
US 1-866-877-6637
5