Diamond PZF/40DS Handleiding voor installatie, gebruik en onderhoud - Pagina 10

Blader online of download pdf Handleiding voor installatie, gebruik en onderhoud voor {categorie_naam} Diamond PZF/40DS. Diamond PZF/40DS 20 pagina's. Hot pizza former

Pagina afdrukken

III. GENERAL FEATURES

1.

Appliance description

The present manual refers to different models of electronically controlled hot pizza forming from the
PIZZAFORM series.
The present manual was originally written in Italian. All other languages are translations.
The main features of this machines series are as follows:
•
Bearing iron frame, 20 mm thick.
•
Body in stainless steel.
•
Self braking motor with built-in thermal protection.
•
Chromed plates cambered all around.
•
Electronic control of temperature and plates contact time.
•
Safety devices in line with UE regulations.
The technical features of your particular oven type are to be found in the enclosed data table (pag.4).
2.

General recommendations

•
Before starting to use the appliance, read this manual carefully, as it contains important technical
information on safety during installation, use and maintenance.
•
The instruction manual should be kept on the user's premises and be available for consultation by all
those assigned to using and maintaining the appliance.
•
The appliance should be installed by qualified personnel in compliance with the manufacturer's
instructions.
•
This appliance should only be used for the purpose for which it has been designed and that is, for
flattening dough balls to make pizza bases or crusts; any other use is to be considered improper.
•
The appliance must only be used by trained personnel and must be attended to during operation.
•
Durante l'uso le superfici dei piatti diventano calde, si raccomanda particolare prudenza.
•
It is advisable to have the equipment checked at least once a year by qualified and authorised per-
sonnel.
•
Switch off and disconnect the appliance in the event of malfunctioning or failure.
•
For any repairs only go to a manufacturer's authorised service centre and ask that original spare parts
be used.
•
Direct jets of water or water jets under pressure should not be used on the appliance.
•
Failure to comply with the above recommendations can jeopardize the appliance correct working and
lead to invalidation of any type of guarantee.
3.

Environment protection

Our appliances are designed to deliver optimal operation and performance.
However, to further reduce energy consumption, we recommend you avoid keeping the appliance
switched on for too long when it is empty (For instance, go through preheating only half an hour before
use).
We also recommend cleaning the appliance with more than 90% biodegradable products.
As for packaging materials, they are all environment compatible and can be stored away safely or
disposed of in the proper waste disposal centres.
The appliance itself at the end of its life cycle can easily be recycled, as it is more than 90% metal.
Do not therefore dump it into the environment.
GB
9