Panasonic WV-SC385 Installatiehandleiding - Pagina 14

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Panasonic WV-SC385. Panasonic WV-SC385 40 pagina's. Ip video cameras
Ook voor Panasonic WV-SC385: Specificaties (2 pagina's), Installatiehandleiding (36 pagina's), Installatiehandleiding (40 pagina's), Vergelijkingstabel (6 pagina's), Installatiehandleiding (40 pagina's), Integratie Opmerking (8 pagina's)

Rear view

12 V DC power supply terminal

About the [INITIAL SET] button

After turning off the power of the camera, turn on the power of the camera while holding down this button, and wait for

around 5 seconds or more without releasing this button. Wait around 3 minute after releasing the button. The camera will

start up and the settings including the network settings will be initialized. Before initializing the settings, it is recommended

to write down the settings in advance. The initialization will be complete when the live indicator stops blinking orange and

lights off. Note that the preset position settings and the CRT key (SSL encryption key) used for the HTTPS protocol will not

be initialized.

Important:

• Do not turn off the power of the camera during the process of initialization. Otherwise, it may fail to initialize and may

cause malfunction.

Important:

• Do not use this hole to mount on the ceiling since the fall prevention measure is unavailable.

Access indicator

(blinking at accessing)

10BASE-T/

100BASE-TX

Link indicator

LINK

(lighting at linking)

Network connector

INITIAL SET button

Cable guide

Audio output connector

INITIAL

POWER

ACT

EXT I/O

MIC/LINE IN

AUDIO OUT

MONITOR OUT

SET

12V IN

4 3 2 1

Screw hole for a tripod

(1/4-20 UNC for tripod)

Monitor out connector

for adjustment

Safety wire holder

Microphone/line input connector

External I/O terminals