Panasonic WV-SP509 Installatiehandleiding - Pagina 31
Blader online of download pdf Installatiehandleiding voor {categorie_naam} Panasonic WV-SP509. Panasonic WV-SP509 36 pagina's. Ip video cameras
Ook voor Panasonic WV-SP509: Specificatie (2 pagina's), Installatiehandleiding (40 pagina's), Integratie Opmerking (8 pagina's)
Pagina afdrukken
Troubleshooting
Before asking for repairs, check the symptoms with the following table.
Contact your dealer if a problem cannot be solved even after checking and trying the solution in the
table or a problem is not described below.
Symptom
Power is not turned on.
The focus cannot be
adjusted.
Cause/solution
When using DC power supply
• Is 12 V DC power supply connected to
the power supply terminal?
Check whether the connection is
appropriately established.
• Is the AC adaptor in use compliant with
the Specifications?
Check the Specifications regarding
AC adaptor.
When using a PoE device for power
supply
• Are the PoE device and the network
connector on the rear of the camera
connected using a LAN cable (4-pair)?
Check whether the connection is
appropriately established.
• Depending on the PoE device, the
power supply will stop when the
demanded power exceeds its total
power limit for all PoE ports.
Refer to the operating instructions of
the PoE device in use.
• Is the zoom ring turned to the "W" (or
"T") end?
Adjust the focus again by slightly
moving the zoom ring to the direc-
tion of "T" (or "W").
Reference
pages
27 - 28
18 - 19
31