Panasonic CT 32SX12 Gebruiksaanwijzing - Pagina 14

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic CT 32SX12. Panasonic CT 32SX12 36 pagina's. Color television

Pagina afdrukken
REMOTE CONTROL OPERATION
Programming
The
Remote
The Universal Remote Control can be programmed to operate many manufacturers' components, using the component
function buttons for VCR, DVD, CABLE or DBS. Follow the procedures for programming your Remote Control with or
without a code for the component.
Default Modes For Remote Control
TV
VCR
DBS
CABLE
DVD
"IV (Panasonic Only)
VCR (Preset)
DBS (Preset)
CABLE (Preset)
DVD, CD (Preset)
Panasonic TV Codes
Panasonic VCR Codes
Panasonic DBS Codes
Panasonic DBS Codes
Panasonic DVD Codes
Determine the manufacturer
of the component and look in the table for the code.
Programming
With a Code
Procedure
Confirm that the extemal component is plugged in and operating.
Turn the component off.
ACTION
•
Press
O
and _
together, for at least 5 seconds,
Press appropriate component button on the Remote Control VCR, DVD, CABLE or DBS.
Enter the 3-digit component code usingthe Remote Control numeric keypad (0 ~ 9 buttons).
Press the Remote Control _
to test the component. If the procedure was successful, the component will turn on.
Hints: Unsuccessful
Code
]
IIf the com__ith
the Remote Control, repeat/
Jthe procedure
using another code.
(Some
brands
have multiple/
Icodes).
/
I If an incorrect code is entered, or if the procedure takes longer than_
[30 seconds, the programming will fail.
J
Programming
Without
A Code
This procedure
searches
all codes and is called the "sequence
method."
Confirm that the external component
is plugged in and on.
Turn the component off.
ACTION
Press
O
and _--_
together, for at least 5 seconds.
Press apprepriate component button on the Remote Control.
Press MOL • to move forward to the next code. Press • VOL to move backward.
Press the Remote Control _
to test the component. If the procedure was successful, the component will turn on.
Note:
Repeat the above steps until the component
code is found. It may take many attempts before the correct code
is found.
ACTION
After the code is found, press
_
to store the code,
12e