Panasonic CT-20G31 Gebruiksaanwijzing - Pagina 22

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic CT-20G31. Panasonic CT-20G31 24 pagina's. Panasonic ct-20g21: user guide
Ook voor Panasonic CT-20G31: Gebruiksaanwijzing (25 pagina's)

Pagina afdrukken

Programming The Universal Remote Control

VCR

Cable Converter

Box

Preferred

Procedure

- Code Known

Programming

Universal

Remote

Using

Infra-Red

Access

Codes for VCRs

• Determine brand of VCR.

• Identify code(s) associated with the brand in the

infra-red

code index for VCRs

(located

in this

manual).

Procedure

Place the Remote TV/CABLE switch into the TV

position (Left).

W_CAe,E

[-¢3

NOTE:

Press and hold VCR POWER button down on

Universal Remote.

VCR POWER

Enter two digit code using keyboard "0 through 9"

buttons. Release VCR Power button. The Universal

Remote is now programmed.

Some brands have multiple codes.

Repeat

procedure

using each code listed until VCR

responds correctly.

Alternate

Procedure

- Code Unknown

Programming

Universal

Remote Using the

"Sequence

Method"

for VCRs

• Confirm VCR is plugged in and operating properly,

then turn OFF.

Procedure

Place the Remote TV/CABLE switch into the TV

position (Left).

TV/CABLE

r-c-]

Press and hold the VCR POWER button down on

Universal

Remote.

VCR POWER

Press VOL RIGHT button repeatedly. Check for the

VCR to turn ON after each press. When the VCR

turns ON, release VCR Power button. The proper

infra-red code has now been accessed.

NOTE:

It may take several attempts before the correct code

is found,

The VOL LEFT button can be used to return to a

code that was accidently passed by.

Some Remote Controls may have unique operating

functions for some buttons. For Example:

The

POWER button may only turn the VCR OFF as

opposed to both ON and OFF. It will then be

necessary to modify the procedure.

Turn the VCR

ON and repeatedly press the VOL RIGHT button

until the VCR turns OFF.

Preferred

Procedure-

Code Known

Programming

Universal

Remote

Using

Infrared

Access

Codes for Cable Television

Converter

Boxes

• Determine brand of Cable Television Converter box.

• Identify code(s) associated with the brand in the

infra-red code index for Cable Television Converter

boxes (located in this manual).

Procedure

1. Place the Remote TV/CABLE switch into the CABLE

position (Right).

W/CABLE

Press and hold the CABLE POWER button down on

Universal Remote.

CABLE

POWER

Enter two digit code using keyboard "0 through 9"

buttons. Release CABLE Power button. The Universal

Remote

is now programmed.

Use

the

Remote

CHANNEL UP/DOWN buttons for selecting Cable

Converter Box channels,

NOTE: Some

brands

have

multiple

codes.

Repeat

procedure

using each code

listed until Cable

Television Converter box responds correctly.

Alternate

Procedure-

Code Unknown

Programming

Universal

Remote

Using

the

"Sequence

Method"

for

Cable

Television

Converter

Boxes

• Confirm Cable Television Converter box is plugged in

and operating properly, then turn OFF.

Procedure

Place the Remote TV/CABLE switch into the CABLE

position (Right).

WlCABLE

Press and hold the CABLE POWER button down on

Universal Remote.

CABLE

POWER

Press VOL RIGHT button repeatedly. Check for the

Cable Television Converter box to turn ON after each

press. When the Cable Television Converter box turns

ON, release Cable Power button. The proper infrared

code has now been accessed.

NOTE:

• It may take several attempts before the correct code is

found.

• The VOL LEFT button can be used to return to a code

that was accidently passed by.

• Some Remote Controls

may have unique operating

functions for some buttons. For Example: The POWER

button may only turn the Cable Television Converter box

OFF as opposed to both ON and OFF. It will then be

necessary to modify the procedure. Turn the Cable

Television Converter box ON and repeatedly press the

VOL RIGHT button until the Cable Television Converter

box turns OFF.

NOTE: When operating equipment (VCR or Cable Converter box) with the Universal Remote Control, the TV/CABLE

Switch should be set to the same position where the Access Code was first programmed for the equipment.

Otherwise, leave the switch in the TV position.

- 22-