Panasonic CT-20R16 Handmatig - Pagina 2
Blader online of download pdf Handmatig voor {categorie_naam} Panasonic CT-20R16. Panasonic CT-20R16 8 pagina's. 20" diagonal stereo monitor-receiver
Ook voor Panasonic CT-20R16: Bedieningshandleiding (12 pagina's), Gebruiksaanwijzing (13 pagina's), Gebruiksaanwijzing (13 pagina's)
![Panasonic CT-20R16 Handmatig](/uploads/products/server2/3760050/3760050.png)
Your new TV Monitor/Receiver
features a solid
state chassis that is designed
to give you many
years of enjoyment,
tt was thoroughly tested and
tuned at the factory for best performance.
Customer
Record
The model and serial number of this product may
be found on the back of the unit. You should note
the model and serial number in the space provided
and
retain
as
a
permanent
record of
your
purchase. This will aid in identification in the event
of theft or loss.
Productregistration is availablefor U.S. customersat:
www.prodreg.com/panasonlo
Model
Number
Serial
Number
Care
and Cleaning
Screen (Turn TV Off)
Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
Use a soft cloth dampened with water or
a mild detergent
solution.
Do not use
benzene,
thinner, or other petroleum
based cleaners.
Wipe dry with a soft clean cloth.
Avoid
excessive moisture.
Specifications
Power Source
CT-13R4
CT-20G24
CT-13R30
CT-20G34
CT-13R40
CT-20R16
CT-20G4
CT-2Ol 3S
CT-20G14
CT-Z1427Z
CT-Z2147Z
CT-Z2127Z
120V AC,
60Hz
Auto
(t10Vca-
220Vca);
5_6OHz
VHFo12;
Channel
Capability - 181
UHF-56;
Cable-113
1V, p.l.p,
Video Input Jacks
75 Ohm,
(some models)
Phono Jack
Type
Audio Input Jacks
500mV RMS
(some models)
47K Ohm
To Audio AMP Jack
0-2.0V RMS
(some models)
4.7K Ohm
Specifications are subject to chan
_ without notice
or obligation.
Television
Location
This unit is intended to be used with an optional
stand or entertainment center. Consult your dealer
for available options.
[3
Avoid excessive
sunlight or bright lights,
including reflections.
{3
Keep away from excessive heat or moisture.
Inadequate
ventilation
may cause internal
component failure.
{3
Fluorescent
lighting
may
reduce
Remote
Control transmitting range.
[3
Avoid magnetic
equipment, including motors,
fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be used
between components.
For best results:
Use 75-ohm coaxial shielded cables.
Use
appropriate
input
and
output
connectors
that match your component
connectors.
Avoid
long
cables
to
minimize
interference.
AC Power Supply Cord
CAUTION:
TO
PREVENT
ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET
Polarizedplug
AND
FULLY
INSERT.
DO
NOT USE A PLUG WITH A
RECEPTACLE
OR
OTHER
Non-Polarizedplug,
OUTLET
UNLESS
THE
BLADE CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.
FOR SOME MODELS THAT
ARE NbN-POLARIZED,
THE
USE OF AN AC
ADAPTOR CONNECTOR
MAY BE NECESSARY.
Batteries
Replace batteries in pairs.
Do not mix battery types (zinc carbon
with alkaline).
Do
not
recharge,
shod-circuit,
disassemble,
heat,
or
burn
used
battehes,
Cable / Antenna
For proper reception, either a cable or antenna
connection are required.
Cable Connection
Connect the cable supplied by your local
cable company.
I
Incoming Cable from Cable Company
75 Ohms VHF/UHF
on backof TV
No_:
A cable converter box may be required
for proper
reception.
Check with your
local
Cable
company
for compatibility
requirements.
-2-