Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C Gebruiksaanwijzing - Pagina 13
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C. Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C 25 pagina's. Panasonic color television operating instructions ct-27d11d, ct-27d31c, ct-2772sc, ct-32d11c, ct-32d31c, ct-3274sc, ct-36d11c, ct-36d31c
Ook voor Panasonic CT-27D11D, CT-27D31C, CT-2772SC, CT-32D11C, CT-32D31C, CT-3274SC, CT-36D11C, CT-36D31C: Gebruiksaanwijzing (50 pagina's)
Pagina afdrukken-!.L'V._R ,D!P OPERATION
WITH A
VCR - No CABLE BOX
2 Tuner
PIP Operation
with a VCR - No Cable
Box
Note:
Refer to the FEATURE COMPARISON CHART on page 3 for your television PIP capability.
This
television
includes
a two
tuner
Picture
In Picture
(PIP)
feature.
This
allows
watching
two (2) live broadcasts
at the same
time without
or with an external
video
source
(VCR).
Connect
your television
to a VCR, as shown.
CONNECTIONS
ON BACK OF TV
I
I
_,,1 [ 3EOiNPUT
l
@ @
,_,
CABLES NOT SUPPLIED
t
VCR
I
Incoming
Cable
Note:
The Remote Control must be programmed with the suppliedcodes to operate the VCR. See
Programming the Remote Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote
Control
to display
the PIP frame on screen.
Note:
The audiois from the Main Picture only
To view an external
video source
in the PIP frame:
1.
Press the TVNIDEO
button on the Remote Control to select the same video input to
which your MCR is connected.
2.
Verify the VCR is on.
3.
Choose channels
for the Main Picture by pressing
the TV button on the Remote
Control and using the numeric keypad orCH up/down button.
4.
Choose channels for the PIP frame by pressing the rv button on the Remote Control
and using the PIP Channel up/down buttons.
"_"
"
SWAP and RECALL
Buttons
The SWAP
button switches the PiP and
Main Picture source, Press the RECALL
button for on screen PiP and Main Picture
source status.