Panasonic CT-27G14 Handmatig - Pagina 2
Blader online of download pdf Handmatig voor {categorie_naam} Panasonic CT-27G14. Panasonic CT-27G14 8 pagina's. Tv monitor-receiver
Ook voor Panasonic CT-27G14: Gebruiksaanwijzing (12 pagina's)
![Panasonic CT-27G14 Handmatig](/uploads/products/server2/3761339/3761339.png)
Your new TV Monitor/Receiver features a solid
state chassis that is designed to give you many
years of enjoyment. It was thoroughly tested and
tuned at the factory for best pedormance.
Customer
Record
The model and serial number of this product may
be found on the back of the unit. You should note
the model and sedal number in the space provided
and retain as a permanent record of your
purchase. This will aid in identificationin the event
of theft or loss.
Product registration is availablefor U.S.customers a t:
www.prodreg.oom/panasonlc
Model
Number
Serial
Number
Care
and Cleaning
Screen (Turn TV Off)
Use a mild soap solution or window
cleaner with a soft clean cloth. DO NOT
USE ABRASIVE CLEANERS.
Avoid excessive moisture and wipe dry.
Cabinet and Remote Control
Use a soft cloth dampened with water or
a mild detergent solution. Do not use
benzene, thinner, or other petroleum
based cleaners.
Wipe dry with a soft clean cloth. Avoid
excessive moisture.
Specifications
Power Source
CT-I 3R4
CT-20G24
CT-13R30
CT-20G34
120V AC,
CT-13R40
CT-20R16
60Hz _
CT-2_4
CT-2013S
CT-20G14
VHF.12;
Channel Capability - 181
UHF-56;
Cable-113
1V
,
Video Input Jacks
75 _o_p_,
(some models)
Phono Jack
Type
Audio Input Jacks
500mV RMS
(some models)
47K Ohm
To Audio AMP Jack
0-2,0V RMS
(some models)
4.7K Ohm
Specificationsare subject to change without notice
or obligation.
Television Location
This unit is intended to be used with an optiona
stand or entertainment center. Consult your deale=
for available options.
[]
Avoid excessive sunlight or bright lights
includingreflections.
C3 Keep away from excessive heat or moisture
Inadequate ventilation may cause interna
component failure.
[]
Fluorescent lighting may reduce Remote
Control transmittingrange.
[]
Avoid magnetic equipment, including motors
fans, or external speakers.
Optional Cable Connections
Shielded audio and video cables should be use(
between components. For best results:
Use 75-ohro co_yJ_at shielded cabtes.
• .
Use appropriate
input and output
connectors that match your component
connectors,
Avoid
long
cables
to
minimize
interference.
AC Power Supply Cord
CAUTION:
TO
PREVENT
ELECTRIC SHOCK, MATCH
WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET
Potadzed plug
AND FULLY INSERT.
DO
NOT USE A PLUG WITH A
RECEPTACLE OR OTHER
Non-Polarizedplug
OUTLET
UNLESS
THE
BLADE CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE, FOR SOME MODELS THAi"
ARE NON-POLARIZED, THE USE OF AN AC
ADAPTOR CONNECTOR MAY BE NECESSARY.
Batteries
Replace batteries in pairs.
Do not mix battery types (zinc carbon
with alkaline).
Do
not
recharge,
shod-cimuit,
disassemble,
heat,
or
bum
use€
battedes.
Cable / Antenna
For proper reception, either a cable or antenna
connectLonare required.
Cable Connection
Connect the cable supplied by your local
cable company.
Incoming Cable from Cable Company
75 OhmsVHFAJHF
onbackofTV
Note:
A cable converter box may be required
for proper reception. Check with your
local Cable company for compatibility
requirements.
-2-