Panasonic CT-27G23 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Panasonic CT-27G23. Panasonic CT-27G23 16 pagina's. 27" diagonal stereo monitor-receiver
Ook voor Panasonic CT-27G23: Bedieningshandleiding (32 pagina's), Gebruiksaanwijzing (32 pagina's)

PICTURE
IN PICTURE
(PIP)
OPERATION
Picture
In Picture
(PIP) Operation
siP Operation With a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature.
A second video
source (VCR, Camcorder, etc,) is required to provide a second picture.
,
Connect your television to a VCR and Cable Box, as shown. (Some models
have only one video input and some models have an S-VIDEO video input.)
r--
,€
(
(
TERMINALS ON BACK OF "IV
....
(m_ay v._a r_)
-"@ @ @ .'-m,
2 _
--INPUT
TO AUDIO
"AMP
Incoming
Cable
Cable Splitter
(Not Supplied)
CABLES NOT SUPPLIED
Note:
The Remote Control must be programmed with supplied codes to
operate the VCR and Cable Box. See Programming the Remote
Control in the Remote Control Quick Reference Guide.
Procedure
Press the PIP button on the Remote Control to display the PIP frame.
Note:
The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
Press the W/VIDEO
button on the Remote Control to select
the video PIP source.
Note:
Verify the CABLE BOX and VCR are ON and the VCR
tuned to channel 3.
Choose channels for the PIP frame by pressing the CABLE
button on the Remote Control and using the numeric keypad
or CH up/clown buttons.
Choose channels for the Main Picture by pressing the TV
button on the Remote Control and using the numeric keypad
or CH up/down buttons.
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for PIP
and Main Picture source status, on screen.
IB