Panasonic CT-31SF20R Gebruiksaanwijzing - Pagina 3
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic CT-31SF20R. Panasonic CT-31SF20R 44 pagina's.
Pagina afdrukken1.4.Ifanoutside antenna isconnected t othetelevision equipment, besure theantenna system isgrounded s oastoprovide
some protection a gainst voltage
surges and built up staticcharges. In the U.S. Section 810 of the National Electrical Code
and in Canada Part I of the Canadian Electrical Code provides information with respect to proper grounding of the mast
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
See Figure.
15. For added protection for this television receiver during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the receiver due to
lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. Unplug this television receiver from the wall outlet, and refer servicing to qualified service personnel under the following
conditions:
a.
When the power cord or plug is damaged or frayed.
b.
If liquid has been spilled into the television receiver.
c.
If the television receiver has been exposed to rain or water.
d.
Ifthe television receiver does not operate normally by following the operating instructions.Adjust only those controls
that are covered by the operating instructionsas improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the television receiver to normal operation.
e.
If the television receiver has been dropped or the cabinet has been damaged.
f.
When the television receiver exhibits a distinct change in performance - this indicates a need for service.
18. Do not attempt to service this television receiver yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
19. When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric
shock, or other hazards.
20. Upon completion of any service or repairs to this television receiver, ask the service technician to perform routine Safety
checks to determine that the television is in safe operating condition.
21. WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture.
22. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS (POLARIZED) PLUG WITH AN EXTENSION CORD,
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED
TO PREVENT BLADE
EXPOSURE.
•NOTE: This equipment is designed to operate inthe U.S.A., Canada and other cou ntries where the broadcasting system and
AC house current is exactly the same as in the U.S.A. and Canada.
Important Information Regarding Use of Video Games, Computers, Teletext or Other Fixed Image Displays.
The extended use of fixed image program material can cause a permanent "shadow image" on the picture tube. This
background image isviewable on normal programs in the form of a stationary fixed image. This type of irreversible picture tube
deterioration can be limited by observing the following steps:
A.
Reduce the brightness/contrast setting to a minimum viewing level.
B.
Do not display the fixed image for extended periods of time.
C,. Turn the power off when not in actual use.
NOTE: The marking or reta!ned image on the picture tube resulting from fixed image use is not an operating defect and as
such is not covered by Warranty. This product is not designed to display fixed image patterns for extended periods of
time.
Power Source:
Channel Capability:
Video Input Jack (3):
Audio Input Jack (3):
To Audio AMP Jacks:
S-VHS Input Jacks (2):
Stereo Sound:
Dome Speaker System:
Program Out:
Program Out:
Picture In Picture:
CiosedCaption
Display:
Specifications
120V 60Hz, AC
. .
181 channels(See chart)
VHF 2~13, UHF 14~69, Cable 125 channels
1V p-p, 75 ohm, phonojack type
High impedance- .10K.(-2,.500mV rms
0~4.0V rms 10K
S-_Video(Y-C) Connector
Video2V p--p 75 ohm phonojacktype
Audio500mV rms 10K.Qphonojack type
Specifications are subject to change without notice or obligation.
Channel Capability Chart
BAND
USA/CAN
VHF
12
UHF
56
CABLE (Mid-Band)
15
CABLE (Super Band)
14
CABLE (Hyper Band)
28
CABLE (Ultra Band)
56
TOTAL CHANNELS
181
3