AquaStar 32CDPH SERIES Handleiding voor installatie-instructies - Pagina 9
Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} AquaStar 32CDPH SERIES. AquaStar 32CDPH SERIES 20 pagina's. Channel drain, submerged, suction, single, unblockable outlet instructions
Pagina afdrukkenFIELD FABRICATED SUMP INSTALLATION (ONE, TWO or THREE PORTS)
IMPORTANT
• Models: 32CDFLFRxxx, 32CDLTFRxxx or
32CDAVFRxxx. 32CDBTFRxxx, 32CDPHFRxxx
(AV=Anti-Vortex)
• Single or multiple drain use
• At IAPMO (a nationally recognized
testing lab), all AquaStar channel drains have
been tested to
three inches in sump depth –
field-fabricated or manufactured
• All AquaStar channel drains are
VGB 2008 compliant
• Plumbing to one or two pumps plus skimmer
equalizer are approved – DO NOT exceed
maximum flow rate of outlet cover for total
system
• One-, two- or three-pipe connections are
approved at any port or configuration under
manufactured sump or field-fabricated sump
• "A" should be a minimum of three (3)inches to
the bottom of cover, must extend the entire
length of the cover.
• Any plumbing configuration is approved but
do not exceed maximum flow rate
• NOTE: 32CDPHFRxxx Flow rate is 256 GPM
(floor) / 196 GPM (wall) when more than one
port is used.
FIELD FABRICATED SUMP INSTALLATION (SINGLE PIPE CONSTRUCTION)
IMPORTANT
• Models: 32CDFLFRxxx, 32CDLTFRxxx,
or 32CDAVFRxxx. 32CDBTFRxxx,
32CDPHFRxxx (AV=Anti-Vortex)
• Single or multiple drain use
• At IAPMO (a nationally recognized
testing lab), all AquaStar Channel
Drains have been tested to 3 inches
in sump depth – field-fabricated or
manufactured
• All AquaStar channel drains are
VGB 2008 compliant
• Plumbing to one or two pumps plus
skimmer equalizer are approved –
DO NOT exceed maximum flow rate
of outlet cover for total system
• One-, two- or three-pipe connections
are approved at any port or
configuration under manufactured
sump or field-fabricated sump
• "A" should be a minimum of three
inches to the bottom of cover
• Any plumbing configuration is
approved but do not exceed
maximum flow rate
2" OR 2-1/2" PIPE
AV STYLE OR FLAT GRATE
(32CDAV)
INTERIOR
POOL FINISH
EARTH
GRAVEL
2 SEPARATE PUMP SYSTEM CONNECTIONS
For additional information on proper drain installation refer to The Association of Pool &
Spa Professionals ANSI/APSP-7 Standard and the U.S. Consumer Product Safety Commission
Guidelines for Entrapment Hazard.
AV STYLE OR FLAT GRATE
(32CDAV)
INTERIOR
POOL FINISH
EARTH
GRAVEL
IMPORTANT
* AT IAPMO (A NATIONALLY RECOGNIZED TESTING LAB),
ALL AQUASTAR SUCTION OUTLET COVERS HAVE BEEN TESTED
WITH 3" DEEP SUMPS (UNLESS OTHERWISE INDICATED).
* "A" SHOULD BE A MIN. 3" TO BOTTOM OF COVER.
For additional information on proper drain installation refer to The Association of Pool &
Spa Professionals ANSI/APSP-7 Standard and the U.S. Consumer Product Safety Commission
Guidelines for Entrapment Hazard.
info
aquastarpoolproducts.com www.aquastarpoolproducts.com
@
fig. 6
FIELD FABRICATED
SUMP INSTALLATION
(ONE, TWO, OR THREE PORTS)
OPTIONAL SINGLE CONNECTION
(32CDFL)
OR HYDROSTATIC VALVE
"A"
1 PUMP WITH 3" OR 4" TEE
fig. 7
FIELD FABRICATED
SUMP INSTALLATION
(SINGLE PIPE CONSTRUCTION)
(32CDFL)
"A"
SINGLE PIPE CONNECTION
CAN BE ANY SIZE AND ANY
LOCATION ALONG CHANNEL SLOT.
FRAME / MUD-RING
SHOTCRETE / GUNITE
FRAME / MUD-RING
SHOTCRETE / GUNITE
9