Diamond Audio Technology D5 300.2 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Diamond Audio Technology D5 300.2. Diamond Audio Technology D5 300.2 17 pagina's. Professional reference series amplifier
Ook voor Diamond Audio Technology D5 300.2: Schematisch diagram (4 pagina's)

Pagina afdrukken

DIMENSIONS

D5 300.2

Length:

12 1/2"

Width:

12"

Height:

2 3/4"

CONTINUOUS RMS OUTPUT POWER

Note: Full Rated Power is generated at all voltages between 11 and 14.5V DC.

D5 300.2

75W x 2 @ 4 Ohm Stereo

150W x 2 @ 2 Ohm Stereo

300W Bridged @ 4 Ohms

(minimum impedance)

CROSSOVER SPECIFICATIONS

Quantity:

Type:

Fully Independent and Adjustable Highpass, Lowpass,

and Subsonic

Slope:

12 dB/Octave Stereo, 24 dB/Octave Lowpass Mono

Alignment:

Butterworth

FUSE RECOMMENDATIONS

D5 Professional Reference Series Amplifiers come with circuit board mounted

fusing. In addition to that we recommend that you install the correct size

fuse/holder combination to the main power cable within 18 inches of the

battery. This will protect your vehicle from fire damage due to a short circuit

to the chassis or vehicle body. If a single amplifier is installed, follow the fuse

recommendation below. If installing multiple amplifiers, add up the total fuse

ratings of all installed amplifiers. This should be used as your main fuse rating.

Amplifier

D5 300.2

D5 600.2

Length: 17"

Width: 12"

Height: 2 3/4"

D5 600.2

150W x 2 @ 4 Ohm Stereo

300W x 2 @ 2 Ohm Stereo

600W Bridged @ 4 Ohms

(minimum impedance)

Maximum Fuse Rating

Diamond Audio Technology 2