Aquatec Beluga Montage-instructies - Pagina 4

Blader online of download pdf Montage-instructies voor {categorie_naam} Aquatec Beluga. Aquatec Beluga 4 pagina's. Change of actuator
Ook voor Aquatec Beluga: Montage-instructies (2 pagina's), Montage-instructie (3 pagina's), Montage-instructies (4 pagina's)

Pagina afdrukken
Assembly instructions
Change circuit board – motor control Aquatec
6.
Fold the actuator back again. Make sure that the spring plate is in the right position.
7.
Attach the bow again to the backrest.
8.
Finally check again if the black gasket of the electronic casing is in its correct
position.
Status: 01.12.06 / Marketing
15980 Change circuit board – motor conrol Beluga
®
Beluga
arch longitudal to
actuator tube
page 4 of 4
V/Allgemein/Montage/Montageanleitungen/Englisch
Beluga/Change circuit board – motor control Beluga