Diamond Guitar Pedals MEMORY LANE Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Diamond Guitar Pedals MEMORY LANE. Diamond Guitar Pedals MEMORY LANE 16 pagina's.

Pagina afdrukken

Modulation Speed

This controls the speed of modulation, from about 0.1 Hz fully counterclock-

wise to 10 Hz fully clockwise.

Mix

With output taken only from the mix/direct jack, this adjusts the relative mix

between direct and delayed signal. With output taken from the delay only

jack, this adjusts the volume of the delayed signal from that output, and does

not affect the direct signal level from the mix/direct jack.

Jacks

Input

Signal input to the delay, accepts standard mono (2-conductor) 1/4" plugs

from guitars, outputs from other effects pedals, or from the send path of an

ampliﬁers FX loop.

Delay Only

Delay signal only output jack, accepts standard 1/4" mono (2-conductor)

plugs. Plugging a cable into this jack automatically removes the delay signal

from the Mix/Direct output and routes it to this output. This allows either

'killdry' operation for amps with parallel FX loops, or provides a stereo-like

experience with two amps when used in conjunction with the direct signal

coming from the Mix/Direct jack. The signal level for this output (when a cable

is plugged into it) is controlled by the Mix pot.

Mix/Direct

This output jack provides two functions: with no cable plugged into the 'Delay

Only' jack, the Mix/Direct output provides a mix of the direct and delayed sig-

nal, with the delayed signal level set by the Mix pot. With a cable plugged into

the 'Delay Only' jack, the Mix/Direct output provides the direct signal only.

Expression/Insert

Plugging into this jack disables the feedback level control and gives the user

external access to the delay's feedback path. This jack accepts a 1/4" TRS

plug (tip-ring-sleeve, or sometimes referred to as a stereo 1/4"plug) from

either an expression pedal, or from a standard studio 1/4" TRS to two 1/4"

mono plug insert cable. Plugging in an expression pedal allows foot control of

the feedback level of the Memory Lane, while an insert cable allows the user

to chain one or more standard guitar effects and/or volume pedal into the

feedback path. Note: at least one of the pedals inserted into the chain must

have a volume control to prevent continuous oscillation.

Switches

On/Off

This switches the pedal between bypass and in-circuit operation, with the red

LED just above the switch indicating that the audio path through the delay is

- 4 -