Panasonic aw-he40 series Installatie- en installatiehandleiding - Pagina 8
Blader online of download pdf Installatie- en installatiehandleiding voor {categorie_naam} Panasonic aw-he40 series. Panasonic aw-he40 series 12 pagina's. Adding another camera to existing system
Ook voor Panasonic aw-he40 series: Snelstarthandleiding (2 pagina's), Snelstarthandleiding (2 pagina's), Handmatig (4 pagina's), Snelstarthandleiding (2 pagina's)
Pagina afdrukken
How can I register and recall the camera's preset memories?
【Registering a Preset Memory】
① Press one of CAMERA STATUS/SELECTION buttons 1 – 5 to select a remote camera to be operated.
– (Fig. 7-A)
② Control the PAN/TILT and ZOOM to set the angle of view. Adjust the FOCUS and IRIS as necessary.
③ Press STORE button. – (Fig. 7-B)
④ From among the PRESET MEMORY/MENU buttons – (Fig. 7-C), hold down a number you desire to
register until "STORE COMPLETE" is displayed on the LCD Panel.
* After the registration is completed, the numbered button will light up.
* If an already-registered number is registered again, the preset is overwritten.
⑤ Press STORE button. – (Fig. 7-B)
(Figure 7: AW-RP50 Control Panel)
（E）
（B）
（D）
【Recalling a Preset Memory】
① Press one of CAMERA STATUS/SELECTION buttons 1 – 5 to select a remote camera to be operated. –
(Fig. 7-A)
② Press an already-registered number (from among the PRESET MEMORY/MENU buttons – (Fig. 7-C)),
and the camera will move into a registered position.
・
For details, please see the illustrated manual
Memories".
* STORE button will light up.
* STORE button will go off.
（C）
（A）
"AW-RP50 – Setting & Controlling Preset
(AW-RP50 LCD Panel)
PRESET
STORE COMPLETE
(Deleting a Preset Memory)
Press DELETE button – (Fig. 7-D) and
then hold down the number until
[DELETE COMPLETE] is displayed on
the LCD Panel.
PRESET
DELETE COMPLETE