Panasonic AW-HS50 Series Snelstarthandleiding - Pagina 3
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Panasonic AW-HS50 Series. Panasonic AW-HS50 Series 4 pagina's. Combining pinp
Ook voor Panasonic AW-HS50 Series: Handmatig (20 pagina's), Brochure & specificaties (4 pagina's), Handmatig (4 pagina's), Handmatig (2 pagina's), Snelstarthandleiding (6 pagina's)
Pagina afdrukken
・ If DVI input is being used as a source, does the output signal have the resolution supported by
AW-HS50 switcher?
When a signal is input with unsupported resolution, the switcher cannot take it in correctly. A black screen or
distorted image may be displayed.
※ For DVI input, please see the following manual "AW-HS50 – DVI Input & Output".
https://eww.pass.panasonic.co.jp/pro-av/support/content/faq/EN/remcam/24_.pdf
・ The input signal is coming via a converter.
If the output signal from the source is being converted (HDMI⇒SDI, HDMI⇒DVI), please check if the format and
resolution of the output signal from the converter are supported by AW-HS50 switcher.
About the converter itself, please contact the manufacturer of your equipment.
・ Is a copyright-protected device being used for an input source?
This switcher does not support HDCP. If a copyright-protected DVD player or PC is used as a source, the output
image is a black screen or distorted.
・ Is FTB (fade to black) ON button – (Figure 1) lit?
When this button is lit, the screen is black after the program image has faded out.
Press FTB ON button to check if an image fades in to be displayed on the screen.
■ "The image won't be switched by pressing crosspoint buttons."
・ Is any of BUS DELEGATION buttons – (Figure 1) blinking?
These 3 buttons are used for selection at the time of setting the AUX bus, PinP source and key source/key fill.
When all of them are off, the switcher can select an input source for the background.
If one button is blinking, press it to turn it off. Then check if the image will be switched.
※ For "BUS DELEGATION" features, please see the following manuals.
☆ [AUX] button: Manual "AW-HS50 – AUX Bus"
https://eww.pass.panasonic.co.jp/pro-av/support/content/faq/EN/remcam/16_.pdf
☆ [PinP] button: Manual "AW-HS50 – Combining PinP"
https://eww.pass.panasonic.co.jp/pro-av/support/content/faq/EN/remcam/15_.pdf
☆ [KEY-F/S] button: Manual "AW-HS50 – Combining Telop"
https://eww.pass.panasonic.co.jp/pro-av/support/content/faq/EN/remcam/13_.pdf
https://eww.pass.panasonic.co.jp/pro-av/support/content/faq/EN/remcam/14_.pdf
Example: DVI input does not support "1080/59.94i".
: Manual "AW-HS50 – Chroma Keying"