Panasonic CF-U1 series Aanvullende informatie - Pagina 6

Blader online of download pdf Aanvullende informatie voor {categorie_naam} Panasonic CF-U1 series. Panasonic CF-U1 series 25 pagina's. Supplementary instructions for hspa modem
Ook voor Panasonic CF-U1 series: Specificatieblad (2 pagina's), Handleiding aanvullende instructies (12 pagina's), Handleiding aanvullende instructies (12 pagina's), Handleiding aanvullende instructies (8 pagina's), Handleiding aanvullende instructies (17 pagina's)

Pagina afdrukken
Panasonic CF-U1 series Aanvullende informatie
Zoom Function
NOTE
You can also make the following settings in [Full Screen Zoom Setup] screen.
Set Zoom Step
You can select intervals of zoom step.
Lower Screen Refresh Rate
The check mark is added as a factory default.
With the check mark added, the screen refresh interval becomes longer when you do not operate the computer a
certain length of time in the zoomed condition.
If the check mark is removed, the computer may not enter standby or hibernation in the zoomed condition.
Hot Key Setting (
Using Zoom Cursor
To use the Zoom Cursor, add a check mark for [Use Zoom Cursor] by following procedure below.
The cursor changes to
1
Click
icon on the notification area.
Zoom menu appears.
2
Click [Use Zoom Cursor] to add a check mark.
NOTE
[Use Zoom Cursor], [About Full Screen Zoom] and [Exit Full Screen Zoom] appear only in the following conditions.
• The zoom ratio is 100% (100% Zoom).
When using application software displaying a unique cursor (i.e. Paint), note the following restrictions.
• The cursor unique for the application software is not enlarged.
• The cursor unique for the application software may not be displayed at the right position. In this case, use Zoom Cursor.
You cannot turn on/off Zoom Cursor during enlarged display.
page
7)
while using the Zoom function.
will also be displayed when it is on the frame of Windows.
6