Panasonic DMC-F5PC Servicehandleiding - Pagina 4

Blader online of download pdf Servicehandleiding voor {categorie_naam} Panasonic DMC-F5PC. Panasonic DMC-F5PC 27 pagina's.

1.4.

How to Discharge the E.Capacitor on the Flash Unit

CAUTION:

1. Make sure to discharge the E.capacitor on the Flash Unit.

2. Be careful of the high voltage circuit on the Flash Unit when servicing.

[Discharging Procedure]

1. Refer to the disassemble procedure and remove the necessary parts/unit.

2. Install the insulation tube onto the lead part of resistor (ERG5SJ102:1kΩ /5W).

(an equivalent type of resistor may be used.)

3. Place a resistor between both terminals of E.capacitor on the Flash Unit for approx. 5 seconds.

4. After discharging, confirm that the E.capacitor voltage is lower than 10V using a voltmeter.

Fig. F1