Panasonic DMC-FT2 Gebruiksaanwijzing - Pagina 5

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic DMC-FT2. Panasonic DMC-FT2 40 pagina's. Brochure
Ook voor Panasonic DMC-FT2: Brochure (2 pagina's), Gebruiksaanwijzing (36 pagina's)

Panasonic DMC-FT2 Gebruiksaanwijzing
∫ About the battery charger
CAUTION!
DO NOT INSTALL OR PLACE THIS UNIT IN A BOOKCASE, BUILT-IN
CABINET OR IN ANOTHER CONFINED SPACE. ENSURE THE UNIT IS
WELL VENTILATED. TO PREVENT RISK OF ELECTRIC SHOCK OR FIRE
HAZARD DUE TO OVERHEATING, ENSURE THAT CURTAINS AND ANY
OTHER MATERIALS DO NOT OBSTRUCT THE VENTILATION VENTS.
DO NOT OBSTRUCT THE UNIT'S VENTILATION OPENINGS WITH
NEWSPAPERS, TABLECLOTHS, CURTAINS, AND SIMILAR ITEMS.
DO NOT PLACE SOURCES OF NAKED FLAMES, SUCH AS LIGHTED
CANDLES, ON THE UNIT.
DISPOSE OF BATTERIES IN AN ENVIRONMENTALLY FRIENDLY
MANNER.
The battery charger is in the standby condition when the AC power supply cord
is connected. The primary circuit is always "live" as long as the power cord is
connected to an electrical outlet.

∫ Cautions for Use

Always use a genuine Panasonic AC adaptor (DMW-AC5E; optional).
Always use a genuine Panasonic multi conversion adaptor (DMW-MCA1; optional).
When using an AC adaptor, use the AC cable supplied with the AC adaptor.
Do not use any other AV cables except the supplied one.
Do not use any other cables except a genuine Panasonic HDMI mini cable
(RP-CDHM15, RP-CDHM30; optional).
Part numbers: RP-CDHM15 (1.5 m) (5 feet), RP-CDHM30 (3.0 m) (10 feet)
Do not use any other USB connection cables except the supplied one.
Keep the camera as far away as possible from electromagnetic equipment
(such as microwave ovens, TVs, video games etc.).
If you use the camera on top of or near a TV, the pictures and sound on the
camera may be disrupted by electromagnetic wave radiation.
Do not use the camera near cell phones because doing so may result in noise
adversely affecting the pictures and sound.
Recorded data may be damaged, or pictures may be distorted, by strong
magnetic fields created by speakers or large motors.
Electromagnetic wave radiation generated by microprocessors may adversely
affect the camera, disturbing the pictures and sound.
If the camera is adversely affected by electromagnetic equipment and stops
functioning properly, turn the camera off and remove the battery or disconnect
AC adaptor (DMW-AC5E; optional). Then reinsert the battery or reconnect AC
adaptor and turn the camera on.
Do not use the camera near radio transmitters or high-voltage lines.
If you record near radio transmitters or high-voltage lines, the recorded pictures
and sound may be adversely affected.
5
(ENG) VQT2M41