HP 10GbE Pass-Thru Module Quickspecs

Blader online of download pdf Quickspecs voor {categorie_naam} HP 10GbE Pass-Thru Module. HP 10GbE Pass-Thru Module 10 pagina's. Pass-thru module

QuickSpecs

Overview

The HP 10GbE Pass-Thru Module is designed for c-Class BladeSystem and HP Integrity Superdome 2 customers requiring a non-

blocking, one -to-one connection between each server and the network. The pass-thru module provides 16 uplink ports that accept

both SFP and SFP+ connectors.

The HP 10GbE Pass-Thru Module can support 1Gb and 10Gb connections on a port by port basis. Optical as well as Direct Attach Copper

(DAC) cables are also supported. Both standard Ethernet as well as Converged Enhanced Ethernet (CEE) traffic to an FCoE capable

switch is possible when using the appropriate NIC or adapter module.

1. UID LED

2. Health LED

3. Ethernet port link status and speed LEDs

What's New

Support for HP ProLiant G7 servers

Support for Converged Network Adapters

At A Glance

Performance:

16 direct server to network connections

Auto-sense 1Gb or 10Gb operation on a port by port basis

Supports standard Ethernet as well as Converged Enhanced Ethernet

Supports all NICs and mezzanine adapters including Flex Adapters

Management:

No management required

Module performance monitored by the On-Board Administrator

Front panel or OA access for service and test and firmware updates

HP 10GbE Pass-Thru Module

DA - 13508 North America — Version 8 — August 17, 2012

4. Reset Button

5. Mini USB RS-232 management port

6. Uplinks ports that accept SFP and SFP+ transceiver modules

and Direct Attach Cables (DAC)

HP 10GbE Pass-Thru Module

Page 1