HP 316095-B21 - StorageWorks Edge Switch 2/24 Handmatig - Pagina 19

Blader online of download pdf Handmatig voor {categorie_naam} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 40 pagina's. Edge switch release notes
Ook voor HP 316095-B21 - StorageWorks Edge Switch 2/24: Handleiding bijwerken (9 pagina's), Handmatig (41 pagina's), Release Release (32 pagina's), Release Release (27 pagina's), Handmatig (26 pagina's), Release Release (27 pagina's), Release Release (25 pagina's), Handleiding voor installatie-instructies (24 pagina's), Release Release (23 pagina's), Release Release (23 pagina's), Release Release (22 pagina's), Release Release (23 pagina's), Release Release (19 pagina's), Release Release (19 pagina's), Release Release (18 pagina's), Gebruiksaanwijzing (17 pagina's), Release Release (17 pagina's), Upgrade-instructies (16 pagina's), Gebruiksaanwijzing (16 pagina's), Handleiding voor installatie-instructies (16 pagina's), Release Release (16 pagina's), Release Release (17 pagina's), Release Release (17 pagina's), Release Release (11 pagina's)

Logs

HAFM audit, event, session, product status, and fabric log files are migrated to the same logs in

HAFM 8.x. As a safeguard, you should export and archive these logs before migrating to

HAFM 8.x.

Product Manager audit, event, hardware, link incident, and threshold alerts are migrated.

Nicknames configured through the Configure Nicknames dialog box in HAFM are migrated.

Information from the Configure Sessions dialog box is migrated. This includes:

•

Network addresses of computers allowed or prohibited from remote sessions

•

Maximum number of remote sessions allowed

All data from the SNMP configuration is migrated. This includes the enable/disable flag and 12

rows of trap information that are configured in the HAFM Configure SNMP dialog box.

All switches and directors identified in the HAFM 6.x or 7.x Products View are migrated into HAFM

discovery and are placed in the Selected Individual Addresses table of the Discover Setup dialog

box. These switches are managed by HAFM 8.x. Note that if an address did not completely

migrate, you can enter the IP address of the switch or director in that dialog box.

Data input through the Configure Threshold Alert wizard in the Product Manager is migrated.

Zones and zone sets are migrated to the default zoning library.

The following types of information are not migrated from HAFM 7.x to 8.x:

•

Configurations for optional HAFM features, such as Open Trunking, SANtegrity Binding,

Enterprise Management Mode, Persistent Fabrics, and FlexPort. You must obtain feature keys for

these optional features to enable them.

•

Except for the firmware library, FAF files, and logs, other Product Manager data is not migrated

since it is stored in switch memory for access by the Element Manager.

•

Files created using the Backup and Restore Configuration option in the Product Manager

(NVRAM backup).

•

Performance data from the Performance view in the Product Manager.

•

Configuration information for switches that are not being managed locally is not included in the

migration.

HA-Fabric Manager transition guide