HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Release - Pagina 17

Blader online of download pdf Release Release voor {categorie_naam} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 19 pagina's. Edge switch release notes
Ook voor HP 316095-B21 - StorageWorks Edge Switch 2/24: Handleiding bijwerken (9 pagina's), Handmatig (41 pagina's), Handmatig (40 pagina's), Release Release (32 pagina's), Release Release (27 pagina's), Handmatig (26 pagina's), Release Release (27 pagina's), Release Release (25 pagina's), Handleiding voor installatie-instructies (24 pagina's), Release Release (23 pagina's), Release Release (23 pagina's), Release Release (22 pagina's), Release Release (23 pagina's), Release Release (19 pagina's), Release Release (18 pagina's), Gebruiksaanwijzing (17 pagina's), Release Release (17 pagina's), Upgrade-instructies (16 pagina's), Gebruiksaanwijzing (16 pagina's), Handleiding voor installatie-instructies (16 pagina's), Release Release (16 pagina's), Release Release (17 pagina's), Release Release (17 pagina's), Release Release (11 pagina's)

Certain Unauthorized Devices may Increase Response Time for Fabric

Operations Under Specific Conditions with the Edge Switch 2/24

When Port Binding is enabled, unauthorized devices (devices that are not set up

by the Port Binding) with older technology can transmit numerous fabric login

(FLOGI) requests, which are rejected by the Edge Switch 2/24. Processing these

exchanges may increase fabric response times for activities such as fabric builds

and valid FLOGI response time for other ports.

Workaround

Remove the unauthorized device, change the Port Binding WWN (if this device

should be authorized), or alternatively disable Port Binding.

CTP Events for Edge Switch 2/24 Show Incorrect FRU Number

Should a CTP event occur in an Edge Switch 2/24, the event log may show

"CTP-24" instead of "CTP-0". There is only one CTP in the Edge Switch 2/24, so

there should be no question as to what FRU is exhibiting the event.

HSG80 Transparent Mode Not Supported with IBM AIX

Use of an HSG80 with IBM AIX is restricted to operating the HSG80 in Multibus

mode with the Edge Switch 2/24 and Edge Switch 2/32. Transparent mode is not

supported at this time.

Workaround

None.

Edge Switch Release Notes

Known Issues