HP 316095-B21 - StorageWorks Edge Switch 2/24 Handleiding voor installatie-instructies - Pagina 11

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 16 pagina's. Edge switch release notes
Ook voor HP 316095-B21 - StorageWorks Edge Switch 2/24: Handleiding bijwerken (9 pagina's), Handmatig (41 pagina's), Handmatig (40 pagina's), Release Release (32 pagina's), Release Release (27 pagina's), Handmatig (26 pagina's), Release Release (27 pagina's), Release Release (25 pagina's), Handleiding voor installatie-instructies (24 pagina's), Release Release (23 pagina's), Release Release (23 pagina's), Release Release (22 pagina's), Release Release (23 pagina's), Release Release (19 pagina's), Release Release (19 pagina's), Release Release (18 pagina's), Gebruiksaanwijzing (17 pagina's), Release Release (17 pagina's), Upgrade-instructies (16 pagina's), Gebruiksaanwijzing (16 pagina's), Release Release (16 pagina's), Release Release (17 pagina's), Release Release (17 pagina's), Release Release (11 pagina's)

Pagina afdrukken
HP 316095-B21 - StorageWorks Edge Switch 2/24 Handleiding voor installatie-instructies
Read these instructions to rack mount the HP StorageWorks Edge Switch 2/24 in the
appropriate HP, or comparable, 19-inch Electronic Industries Association (EIA) rack:
•
HP 9000 series, 10000 series and 11000 series racks
•
HP rack system/e or 19-inch EIA rack

Edge Switch Rack Mount Kit Checklist

The hardware kit includes parts not required for the configuration described in these
instructions.

Mounting Hardware

•
Two (2) two-hole bar nuts
•
Six (6) three-hole bar nuts (only 4 used)
•
Eight (8) square alignment washers (required only for HP 9000, 10000 and 11000
series racks)
•
Eight (8) Phillips panhead screws (10-32 x 1/2) with split lock and flat washers
•
Four (4) Phillips flathead screws (8-32 x 7/16)
•
Ten (10) Phillips panhead screws (10-32 x 5/8) with flat washer (only 2 used)
•
Six (6) Phillips flathead screws (6-32 x 3/8) (not used)
•
Twelve (12) Phillips panhead screws (10-32 x 3/8) (not used)
•
Four (4) 8-32 Keps nuts (not used)
edge switch 2/24 rack mount kit installation instructions

Installation Instructions

1