HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Release - Pagina 14

Blader online of download pdf Release Release voor {categorie_naam} HP 316095-B21 - StorageWorks Edge Switch 2/24. HP 316095-B21 - StorageWorks Edge Switch 2/24 17 pagina's. Edge switch release notes
Ook voor HP 316095-B21 - StorageWorks Edge Switch 2/24: Handleiding bijwerken (9 pagina's), Handmatig (41 pagina's), Handmatig (40 pagina's), Release Release (32 pagina's), Release Release (27 pagina's), Handmatig (26 pagina's), Release Release (27 pagina's), Release Release (25 pagina's), Handleiding voor installatie-instructies (24 pagina's), Release Release (23 pagina's), Release Release (23 pagina's), Release Release (22 pagina's), Release Release (23 pagina's), Release Release (19 pagina's), Release Release (19 pagina's), Release Release (18 pagina's), Gebruiksaanwijzing (17 pagina's), Release Release (17 pagina's), Upgrade-instructies (16 pagina's), Gebruiksaanwijzing (16 pagina's), Handleiding voor installatie-instructies (16 pagina's), Release Release (16 pagina's), Release Release (17 pagina's), Release Release (11 pagina's)

Pagina afdrukken

HP 316095-B21 - StorageWorks Edge Switch 2/24 Release Release

Table 6 Zoning limits

Zoning parameter

Number of zone members in a zone

Number of zones in a zone set

Number of unique zone members in a zone set

Total number of zone members in a zone set

(where a zone member can be in multiple zones)

Characters per zoning name

Number of unique zone members in

HAFM Zoning Library

Number of zones in HAFM Zoning Library

Number of zone sets in HAFM Zoning Library

Number of end ports

Number of devices supported (including loop

devices)

Using the same ﬁrmware level

All Edge Switches and Directors in the same fabric should have the same ﬁrmware level installed—whether

1Gb/s, 2Gb/s, or 4Gb/s capable—to ensure that this ﬁrmware operates correctly.

Firmware 09.06.02 is common for all M-Series fabric products, except the McDATA 4Gb SAN Switch for

HP p-Class BladeSystem, which has a separate ﬁrmware.

Reinstalling feature licenses

Feature licenses (or keys) must be reinstalled after performing a factory reset on an Edge Switch or

Director to regain use of the licensed features (for example, SANtegrity Binding).

CTP controls port lights

Port lights on the Edge Switches and Directors are controlled by the CTP. Certain activities such as

ﬁrmware updates, IPLing the CTP, or switching over to the backup CTP (Director) can cause these port

lights to extinguish momentarily until control is reasserted by the CTP. The actual Fibre Channel trafﬁc is

not affected during these times.

Full-fabric capability for Edge Switch 2/12

Unlike other Edge Switch and Director products, a PFE key controls Edge Switch 2/12 E_Port-to-E_Port

connections. After purchasing and installing the feature key, you can conﬁgure for E_Port connections on

any of the active ports.

The feature key includes distance support. With ﬁrmware 06.00.00 and later, the Edge Switch 2/12

ships with ﬁve BB_credits allocated to each port. After activation of the Full Fabric feature on a switch,

each port has 12 BB_Credits allocated to support up to 12-km links at 2-Gb/s speed.

Support for speed Auto-Negotiate

Auto-negotiate is supported. However, HP recommends that the port speed for E_Ports (for ISLs) be set to

a speciﬁc port speed (1Gb/sec, 2Gb/sec, or 4Gb/sec as appropriate for the speed of the Directors

or Edge Switches being connected) instead of to Negotiate. Using a speciﬁc port speed decreases the

time required for a fabric build in response to some perturbation in the fabric. Similarly, setting a

Maximum value

2048

1024

2048

4096

2048

1024

2048