HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch Installatiehandleiding - Pagina 25
Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch. HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch 28 pagina's. Fabric clustering system 24-port 4x fabric copper switch installation guide, march 2005
Ook voor HP 376227-B21 - ProLiant InfiniBand 4x Fabric Copper Switch: Witboek (13 pagina's), Implementatiehandleiding (9 pagina's)
Pagina afdrukken
3. Configure an IP address for the Ethernet management port. It is necessary to configure connectivity to
the out-of-box Ethernet management port in order to use Telnet or the GUI. The switch Ethernet
management port is not pre-configured when it ships from the factory.
a. When the switch has completed booting, press Enter several times to display the CLI prompt.
Login:
b. Enter the default user name super and password super.
Login: super
Password: super
HP>
c.
Enter enable.
HP> enable
HP #
d. Enter configure.
HP # configure
HP (config)#
e. Enter interface mgmt-ethernet to enter config-if-mgmt-ethernet mode.
HP(config)# interface mgmt-ethernet
HP(config-if-mgmt-ethernet)#
f.
Enter the IP address of the management port followed by the netmask. For example:
HP(config-if-mgmt-ethernet)# ip address 10.10.0.22 255.255.255.0
g. Set the default gateway for the management port. Ask your system administrator for a gateway
address. For example:
HP(config-if-mgmt-ethernet)# gateway 10.10.0.1
h. Enable the management port by entering no shutdown.
HP(config-if-mgmt-ethernet)# no shutdown
i.
Save the configuration to preserve it between reboots.
HP(config-if-mgmt-ethernet)# exit
HP(config)# exit
HP# copy running-config startup-config
Attach Cables
Copper cables for InfiniBand should be securely attached to the rack enclosure. HP recommends the use of a
HP E7723B Cable Guide Installation Kit mounted in a horizontal fashion. A second Cable Guide is in the kit
and it can be installed in the horizontal or vertical position to better guide & support the cables for either the
switch or HCA. Cable Guide Installation Instructions are provided as a separate document included with the
Cable Guides.
Chapter 2
ProLiant Linux Installation Overview & Planning
Attach Cables
25