HP ProCurve 1600M Demontage-instructies - Pagina 2

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Torx Driver

Wire cutter

Pliers

Flat blade screwdriver

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove all external screws from power supply. (typically 4 screws)

2. Slide top half toward the rear to separate the two halves of the case.

3. Cut the wires connecting the PCA to the connector.

4. Remove the ground wire from the case using a medium flat blade.

5. Remove mounting screws holding PCA to bottom cover.

6. Using pliers, break off (2) electrolytic capacitors off the PCA.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

EL-MF877-00

Template Revision A

Tool Size (if

applicable)

# 10

Medium

Page 2