HP ProCurve 5300xl Aanvullende handleiding - Pagina 26

Blader online of download pdf Aanvullende handleiding voor {categorie_naam} HP ProCurve 5300xl. HP ProCurve 5300xl 38 pagina's. Access controller xl module to the hp procurve 6400cl/5300xl/3400cl
Ook voor HP ProCurve 5300xl: Specificatieblad (12 pagina's)

Pagina afdrukken
Configuring the Access Controller xl Module
22
Syntax:
[no] access-controller <slot-id> client-ports vlan < vlan-list >
Configures client VLANs with the VIDs given, contain­
ing only the downlink port, (<slot-id>DP), as a tagged
member.
The no form can be used to remove client VLANs that
were configured using the access-controller <slot-id>
client-ports vlan < vlan-list > command and contain only
the downlink port.
Syntax:
access-controller <slot-id> reload]
Reboots the access controller in slot-id with the current
software version.
Syntax:
access-controller <slot-id> shutdown]
Halts the access controller in slot-id.
Syntax:
access-controller vlan-base <2-4094>]
Sets the starting VLAN ID (VID) for client VLANs
configured by the access-controller <slot-id> client-ports
< port-list > or the access-controller <slot-id> client-ports
vlan < vlan-list> commands. Valid VIDs are 2 - 4094.

Access Controller Context Command Syntax

Syntax:
access-control-server ip <ip addr> secret <secret> <secret>]
Specifies the numeric ip address and shared secret for
the access control server (740wl or 760wl) that pro­
vides services to the ACM.
The secret must match the shared secret configured on
the 740wl/760wl. If the shared secret contains spaces,
enclose the secret in double quotes (" "). The secret must
be entered twice, identically.