HP ProCurve J8765A Installatiehandleiding - Pagina 41
Blader online of download pdf Installatiehandleiding voor {categorie_naam} HP ProCurve J8765A. HP ProCurve J8765A 48 pagina's. Hp procurve switch vl modules
Ook voor HP ProCurve J8765A: Specificaties (22 pagina's)
Pagina afdrukken
Installing the Patch Cord
As shown in the illustration below, connect the patch cord to the Gigabit-LX
mini-GBIC with the section of single-mode fiber plugged in to the Tx (transmit)
port. Then, connect the other end of the patch cord to your network cabling
patch panel, or directly to the network multimode fiber.
If you connect the patch cord directly to the network cabling, you may need
to install a female-to-female adapter to allow the cables to be connected
together.
to network
multimode
cabling
the multimode cable in the patch cord
must match the characteristics of your
network cable
Figure 14. Mode Conditioning Patch Cord
Ensure you purchase a patch cord that has LC connectors on the end that
connects to the Gigabit-LX mini-GBIC, and has multimode fibers that match
the characteristics of the multimode fiber in your network.
ProCurve Switch vl Modules
Mode Conditioning Patch Cord for Gigabit-LX
Gigabit-LX port
LC Connector
single-mode section plugs into Tx
port on Gigabit-LX mini-GBIC
35