HP StorageWorks 1000 - Modular Smart Array Firmware bijwerken - Pagina 8

Blader online of download pdf Firmware bijwerken voor {categorie_naam} HP StorageWorks 1000 - Modular Smart Array. HP StorageWorks 1000 - Modular Smart Array 9 pagina's. Power supply, computer
Ook voor HP StorageWorks 1000 - Modular Smart Array: Netwerkhandleiding (8 pagina's), Ondersteuningslijst (34 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Overzicht (20 pagina's), Installatiehandleiding (2 pagina's), Telefoonnummers voor ondersteuning (19 pagina's), Referentiehandleiding (48 pagina's), Administratiehandleiding (40 pagina's), Release Release (13 pagina's), Snel aan de slag Instructies (8 pagina's), Snelstarthandleiding (7 pagina's), Release Release (5 pagina's), Instructies voor vervanging (4 pagina's), Witboek (13 pagina's), Beknopte technologie (15 pagina's), Quickspecs (17 pagina's), Specificatie (49 pagina's), Aan de slag handleiding (34 pagina's), Installatie (4 pagina's), Installatiehandleiding (18 pagina's), Handleiding demontage-instructies (9 pagina's), Handleiding voor programmering (8 pagina's)

For more information on how to deploy firmware updates remotely, refer to the following URL:

http://h18004.www1.hp.com/products/servers/management/im/index.html

Updating Firmware Using The Offline ROM Flash Method

The Offline ROM Flash, as its name implies, is performed when the server is taken down for regular

maintenance. Although the results will be the same, the Offline ROM Flash does not provide the same

benefits of the new Online ROM Flash method. In addition, when upgrading remotely, the server administrator

can only update one server at a time.

There are two methods of performing an Offline ROM Flash. The firmware can be updated using a ROMPaq

Diskette or using either the ROM Update Utility or the HP Smart Update Manager.

IMPORTANT: Beginning with the Firmware Maintenance CD Version 7.50, the HP Smart Update Manager

Utility has replaced the HP ROM Update Utility. All other firmware update methods, including Offline Systems

ROMPaq and Online ROM Flash are unaffected and continue to be supported methods of flashing the

System ROM.

The Customer Notice, HP Smart Update Manager Utility Replaces HP ROM Update Utility on the Firmware

Maintenance CD and Provides Enhancements for Upgrading Firmware on ProLiant Servers, provides

information on the differences between the HP Smart Update Manager Utility and the HP ROM Update Utility

and the upgrades and enhancements available in HP Smart Update Manager. Refer to the following URL to

view this Customer Notice:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?locale=en_US&objectID=c01039146

A ROMPaq is a floppy-disk based method of upgrade. The firmware is downloaded onto a floppy diskette and

then the system is booted to the floppy drive.

The ROM Update Utility is located on the Firmware Maintenance CD, or can be downloaded to a USB Drive

Key using the HP Drive Key Boot Utility.

Note: Hard Drive components can only be updated using the Offline method.

The HP Drive Key Boot Utility

The HP Drive Key Boot Utility can format an HP Drive Key so that it can be used as a bootable device. The

utility also provides the ability to load the ROM Update Utility on an HP Drive Key. After the ROM Update

Utility has been installed, the Offline ROM Flash Smart Components can be downloaded to the drive key from

the following URL and deployed using the ROM Update Utility:

http://h18023.www1.hp.com/support/files/server/us/smartstartGP.html

System ROM support is required for the HP Drive Key Utility. To determine server support, refer to the

following URL:

http://h18004.www1.hp.com/products/servers/platforms/usb-support.html

For additional information on the HP Drive Key Boot Utility, refer to the following URL:

http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00218060/c00218060.pdf