HP StorageWorks 2/16 - SAN Switch Release Release - Pagina 32

Blader online of download pdf Release Release voor {categorie_naam} HP StorageWorks 2/16 - SAN Switch. HP StorageWorks 2/16 - SAN Switch 32 pagina's. Fabric os commands
Ook voor HP StorageWorks 2/16 - SAN Switch: Handleiding bijwerken (9 pagina's), Handleiding voor installatie-instructies (20 pagina's), Gebruikershandleiding (22 pagina's), Opmerkingen over firmware-uitgave (14 pagina's), Release Release (16 pagina's), Installatiehandleiding (14 pagina's), Release Release (10 pagina's), Snelle referentiehandleiding (5 pagina's)

Documentation Updates

Table 4: Version 3.1.2 Error Messages Not Previously Available (Continued)

Severity & Message

Critical

DIAG-TIMEOUT, 1

Critical

DIAG-XMIT, 1

Probable Cause

For portloopbacktest and

crossporttest:

Port failed to receive frame within

timeout period.

For centralmemorytest:

Port failed to detect an interrupt

within the timeout period.

This can be caused by a faulty cable

or deteriorated SFP. It can also

indicate deeper problems in the

motherboard or ASIC.

Port failed to transmit frame. This

usually indicates an ASIC failure.

This message is generated by the

camtest, portloopbacktest,

and spinsilk commands, if

problems are found.

Recommended Action

Check for a faulty cable or

deteriorated SFP. Replace the

cable or SFP if necessary.

If the problem persists:

For the SAN Switch 2/16,

replace the motherboard FRU.

For the SAN Switch 2/8 EL, you

must replace the entire switch.

For the SAN Switch 2/16,

replace the motherboard FRU.

For the SAN Switch 2/8 EL, you

must replace the entire switch.

SAN Switch 2/16 Fabric OS 3.1.2 Release Notes