HP StorageWorks 8/24 - SAN Switch Release Release - Pagina 13
Blader online of download pdf Release Release voor {categorie_naam} HP StorageWorks 8/24 - SAN Switch. HP StorageWorks 8/24 - SAN Switch 30 pagina's. Hp storageworks fabric os 6.1.2b release notes (5697-0351, march 2010)
Ook voor HP StorageWorks 8/24 - SAN Switch: Specificaties (20 pagina's), Release Release (29 pagina's), Release Release (32 pagina's)
Pagina afdrukken
Power supply requirements for Director blades
Table 4
lists power supply requirements for Director blades to provide full redundancy (220V power
is assumed).
IMPORTANT:
Director blades must meet minimum Fabric OS levels to operate in Director chassis. For example, the
FC8-32 is not supported in the 4/256 SAN Director with Fabric OS 6.0.x.
Table 4 Power supplies required for blades in Director chassis
Director blade
FC4-16
FC4-32
FC4-48
FC8-16
FC8-32
FC8-48
FC10-6
FR4-18i (FCIP/FC Router blade)
FC4-16IP (iSCSI blade)
1
The DC Director may be operated with nominal power of 110 VAC. See the appropriate hardware reference guide for power
specifications.
Fibre Channel Routing (FCR) scalability
For the latest scalability support information, see the HP StorageWorks SAN Design reference guide:
http://www.hp.com/go/sandesignguide
Firmware upgrade instructions
IMPORTANT:
HP recommends that users upgrade to Fabric OS 6.1.0h as soon as possible. Upgrading to Fabric
OS 6.1.0h is allowed only from Fabric OS 6.0.x or earlier releases of 6.1.x. See
Update
recommendations, page 6 for additional guidelines.
To access the latest Fabric OS 6.1.0h firmware, configuration files, and MIB files, visit the following
HP website:
http://www.hp.com/support/downloads
At the website:
4/256 SAN Director
Two power supplies
Four power supplies
Four power supplies
HP StorageWorks Fabric OS 6.1.0h release notes
1
DC SAN Director
Two power supplies
Two power supplies
Two power supplies for the FR4-18i.
FC4-16IP is not supported in the DC
Director.
13