HP StorageWorks 8B - FC Entry Switch Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HP StorageWorks 8B - FC Entry Switch. HP StorageWorks 8B - FC Entry Switch 44 pagina's. Fabric os release notes version 3.0.1b
Ook voor HP StorageWorks 8B - FC Entry Switch: Handleiding bijwerken (9 pagina's), Handleiding voor installatie-instructies (20 pagina's), Gebruikershandleiding (22 pagina's), Opmerkingen over firmware-uitgave (14 pagina's), Installatiehandleiding (14 pagina's), Release Release (26 pagina's), Handmatig (50 pagina's), Gebruikershandleiding (44 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (38 pagina's), Gebruikershandleiding (37 pagina's), Gebruikershandleiding (30 pagina's), Release Release (16 pagina's)

Saved

In Figure 3-1, the defined and effective configurations are saved to flash:

Defined

Disable Path

Enable Path

Save Path

Figure 3-1

In Figure 3-2, Config 5 is defined (created). When it is defined, it resides only in RAM. To

permanently store the new configuration and make it accessible across reboots, it must be saved to

flash memory.

This can be accomplished by:

•

Saving it directly to flash (the recommended method). This saves the defined and effective

configurations to flash. If there is no effective configuration, saving it will not enable a

configuration. To save a configuration, use the cfgSave command.

•

Enabling it. This saves the defined and effective configurations to flash. To enable a

configuration, use the cfgEnable command.

Zoning User's Guide

This is the zone configuration that was last saved. It resides in flash memory

and it is persistent.

Effective

Config 1

Config 2

Config 3

Config 4

Config 5

Enabling a Zone Configuration

Disabled

Saved

Defined

Config 1

Config 2

Config 3

Config 4

Config 5

Effective

Config 1

Using Zoning

3-3