HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Referentiehandleiding - Pagina 13

Blader online of download pdf Referentiehandleiding voor {categorie_naam} HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM. HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM 46 pagina's. 1u rackmount tape enclosure
Ook voor HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM: Installatie-instructies (2 pagina's), Handleiding voor installatie-instructies (20 pagina's), Installatiehandleiding (14 pagina's), Release Release (14 pagina's), Installatie-instructies (2 pagina's)

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Referentiehandleiding
2

Tape Drive Installation

A 3/16" (5mm) flat-blade screwdriver or T-15 Torx driver may be required to install a tape drive in
the 1U tape enclosure.
CAUTION:
To avoid damaging the equipment due to electrostatic discharge, be sure to review and
practice the procedures in Appendix B before handling the tape drives.
To install a tape drive:
Remove the top access panel as shown.
1.
3
2
1
15107
Figure 5
Removing top access panel
1U Rackmount Tape Enclosure Reference Guide
13