HP StorageWorks SAN Switch 2/8 Power Pak Release Release - Pagina 18
Blader online of download pdf Release Release voor {categorie_naam} HP StorageWorks SAN Switch 2/8 Power Pak. HP StorageWorks SAN Switch 2/8 Power Pak 26 pagina's. San switch 2/8 version 3.0.2k release notes
Ook voor HP StorageWorks SAN Switch 2/8 Power Pak: Release Release (16 pagina's)
Pagina afdrukken
SNMP-based Management
SNMP-based Management
Many SNMP Fibre Channel Management programs have the capability to log
SNMP trap information (error and status events) occurring on the switch into the
Windows NT application Event log. To enable this capability, parameters must be
set on the switch.
Note:
button and clicking on the SNMP Admin tab, or by using the Telnet interface along with
the agtcfgSet Telnet command.
The switch will send one copy of a trap message to each IP address that is listed in
the communities. If you enter the same IP address into more than one of the
communities, you will get multiple copies of the same trap message.
■
■
Note:
18
These parameters can be set either through Web Tools by selecting the admin.
swEventTrapLevel: (0..5)—must be set for a severity level from 0 to 5
— 0 – none
— 1 – critical
— 2 – error
— 3 – warning
— 4 – informational
— 5 – debug
authTrapsEnabled: (true, t, false, f)—must be set to true or t to enable
sending of traps
This parameter is set to
true
t
or
by default.
SAN Switch 2/8 Version 3.1.x Release Notes