HP StorageWorks XP10000 - Disk Array Handleiding systeemconfiguratie - Pagina 17

Blader online of download pdf Handleiding systeemconfiguratie voor {categorie_naam} HP StorageWorks XP10000 - Disk Array. HP StorageWorks XP10000 - Disk Array 49 pagina's. Cache lun xp
Ook voor HP StorageWorks XP10000 - Disk Array: Release Release (13 pagina's), Handleiding voor beheerders (50 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (36 pagina's), Release Release (5 pagina's), Handleiding systeemconfiguratie (43 pagina's), Handleiding systeemconfiguratie (42 pagina's), Handleiding systeemconfiguratie (35 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (38 pagina's), Configuratiehandleiding (34 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (42 pagina's), Gebruikershandleiding (30 pagina's)

HP StorageWorks XP10000 - Disk Array Handleiding systeemconfiguratie

NetWare Client settings

NetWare 6.x
NetWare Client software is required for the client system. After installing the software on
the NetWare server, follow these steps:
1.
Open the Novell Client Configuration dialog and click the Advanced Settings tab.
2.
Change the following parameters:
Give up on Requests to Sas: 180 Net Status Busy Timeout: 90

NetWare ConsoleOne settings

NetWare 6.x
Novell NetWare v6.x requires a tool called ConsoleOne to work in a storage
environment. ConsoleOne is a free Java utility used to manage network resources.
Configure ConsoleOne as follows:
1.
Ensure NetWare Client software is already installed.
2.
Install ConsoleOne on the NetWare 6.x server.
3.
From the NetWare Client, run ConsoleOne:
z:public/mgmt/consoleOne/1.2/bin/ConsoleOne
4.
Right click the Server icon, and select "Disk Management Devices."
5.
Scroll left to the Media tab.
6.
Click Partitions, New, and select a device.
7.
Click Create, click NSS pools, click New, and name the pool. The pool name and
volume name can be the same.
8.
Click Create, click NSS Logical Volume, select New, name the volume, then select
the pool.
9.
Select Allow volume quota to grow to pool size.
10.
Leave the default settings on the next page and click Finish.

Fabric zoning and LUN security

If you plan to use clustering, install and configure the clustering software on the servers.
Clustering is the organization of multiple servers into groups. Within a cluster, each
server is a node. Multiple clusters compose a multi-cluster environment. The following
example shows a multi-cluster environment with three clusters, each containing two
nodes. The nodes share access to the disk array.
HP StorageWorks Disk Array XP operating system configuration guide Novell Netware
17