HP StorageWorks XP12000 Configuratiehandleiding - Pagina 10

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} HP StorageWorks XP12000. HP StorageWorks XP12000 44 pagina's. Cache lun xp
Ook voor HP StorageWorks XP12000: Release Release (13 pagina's), Handleiding voor beheerders (50 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (36 pagina's), Release Release (5 pagina's), Handleiding systeemconfiguratie (49 pagina's), Handleiding systeemconfiguratie (43 pagina's), Handleiding systeemconfiguratie (42 pagina's), Handleiding systeemconfiguratie (35 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (38 pagina's), Configuratiehandleiding (34 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (50 pagina's), Gebruikershandleiding (30 pagina's)

Pagina afdrukken
HP StorageWorks XP12000 Configuratiehandleiding

Defining the paths

Use P9000 or XP Command View Advanced Edition Software or XP Remote Web Console (shown)
to define paths between hosts and volumes (LUNs) in the disk array.
This process is also called "LUN mapping." In the XP Remote Web Console, LUN mapping includes:
Configuring ports
Enabling LUN security on the ports
Creating host groups
Assigning Fibre Channel adapter WWNs to host groups
Mapping volumes (LDEVs) to host groups (by assigning LUNs)
In P9000 or XP Command View Advanced Edition Software, LUN mapping includes:
Configuring ports
Creating storage groups
Mapping volumes and WWN/host access permissions to the storage groups
For details see the HP StorageWorks XP LUN Manager User s Guide. Note the LUNs and their ports,
WWNs, nicknames, and LDEVs for later use in verifying host and device configuration.

Setting the host mode and host group mode for the disk array ports

After the disk array is installed, you must set the host mode for each host group that is configured on
a disk array port to match the host OS. Set the host mode using LUN Manager in XP Remote Web
Console(shown) or P9000 or XP Command View Advanced Edition Software. If these are not available,
the HP service representative can set the host mode using the SVP. The host mode setting for Novell
NetWare is 0A.
10
Installing and configuring Novell NetWare for the XP family of disk arrays