HP StorageWorks XP12000 Configuratiehandleiding - Pagina 9

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} HP StorageWorks XP12000. HP StorageWorks XP12000 38 pagina's. Cache lun xp
Ook voor HP StorageWorks XP12000: Release Release (13 pagina's), Handleiding voor beheerders (50 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (36 pagina's), Release Release (5 pagina's), Handleiding systeemconfiguratie (49 pagina's), Handleiding systeemconfiguratie (43 pagina's), Handleiding systeemconfiguratie (42 pagina's), Handleiding systeemconfiguratie (35 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (34 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (50 pagina's), Gebruikershandleiding (30 pagina's)

Pagina afdrukken
HP StorageWorks XP12000 Configuratiehandleiding
Figure 1 SNMP configuration
.

RAID Manager command devices

RAID Manager manages HP StorageWorks XP Business Copy Software or HP StorageWorks XP
Continuous Access Software operations from a host server. To use RAID Manager, you must designate
at least one LDEV as a command device. For information about how to designate a command device,
see the applicable user guide
When creating a command device, HP recommends creating a LUN 0 device of 35 megabytes (the
smallest allowed). This allows you to use host-based RAID management tools available from HP, and
will allow HP support to perform some additional diagnostics.
NOTE:
Storage assigned to the LUN 0 device is not accessible to OpenVMS.

Installation roadmap

Perform these actions to set up the disk array:
1.
Installing and configuring the disk array
Defining the paths
Setting the host mode for the disk array ports
Setting the UUID
Setting the system option modes
Configuring the Fibre Channel ports
2.
Installing and configuring the host
Loading the operating system and software
Installing and configuring the FCAs
Clustering and fabric zoning
Fabric zoning and LUN security for multiple operating systems
3.
Configuring FC switches
4.
Connecting the disk array
Verifying disk array device recognition
XP Disk Array Configuration Guide: OpenVMS
9