HP StorageWorks XP12000 Configuratiehandleiding - Pagina 16

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} HP StorageWorks XP12000. HP StorageWorks XP12000 30 pagina's. Cache lun xp
Ook voor HP StorageWorks XP12000: Release Release (13 pagina's), Handleiding voor beheerders (50 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (36 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (36 pagina's), Release Release (5 pagina's), Handleiding systeemconfiguratie (49 pagina's), Handleiding systeemconfiguratie (43 pagina's), Handleiding systeemconfiguratie (42 pagina's), Handleiding systeemconfiguratie (35 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (46 pagina's), Configuratiehandleiding (40 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (38 pagina's), Configuratiehandleiding (34 pagina's), Configuratiehandleiding (30 pagina's), Configuratiehandleiding (42 pagina's), Configuratiehandleiding (50 pagina's), Gebruikershandleiding (30 pagina's)

Pagina afdrukken
HP StorageWorks XP12000 Configuratiehandleiding
Figure 3 Direct attach without a SAN example
Table 2 Fabric topology settings
Fabric Parameter
ON
ON
OFF
OFF

Installing and configuring the host

This section explains how to install and configure the host and Fibre Channel ServerNet Adapters
(FCSAs) that connect the host to the disk array.

Loading the operating system and software

Follow the manufacturer's instructions to load the operating system and software onto the host. Load
all OS patches and configuration utilities supported by HP.

Installing and configuring the FCSAs

Install and configure the adapters using the Fibre Channel ServerNet Adapter Installation and Support
Guide, available at the NonStop Technical Library website:
http://h30163.www3.hp.com/ntl/.

Fabric zoning and LUN security for multiple operating systems

You can connect multiple clusters of various operating systems to the same switch using appropriate
switch zoning and array LUN security as follows:
•
Use Secure Manager for LUN isolation when multiple NonStop systems connect through a shared
array port. Secure Manager provides LUN security by allowing you to restrict which LUNs each
host can access.
16
Installing and configuring NonStop for the XP disk array
Connection Parameter
FC-AL
Point-to-Point
FC-AL
Point-to-Point
Provides
Not supported
N-port (SAN fabric port)
NL-port (private arbitrated loop; direct connect without a
SAN)
Not supported