HP Xw460c - ProLiant - Blade Workstation Overzicht - Pagina 10

Blader online of download pdf Overzicht voor {categorie_naam} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 pagina's. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ook voor HP Xw460c - ProLiant - Blade Workstation: Implementatiehandleiding (35 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Installatiehandleiding (2 pagina's), Handleiding met veelgestelde vragen (14 pagina's), Poster opstellen (9 pagina's), Installatiehandleiding (33 pagina's), Management Handleiding (28 pagina's), Hardware Handleiding (23 pagina's), Gebruikershandleiding (33 pagina's), Handleiding voor optimalisatie (13 pagina's), Beperkte garantie (10 pagina's), Handleiding voor installatie-instructies (10 pagina's), Handleiding voor installatie-instructies (8 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's)

ProLiant Onboard Administrator (Integrated Lights-Out 2) for ProLiant

server blades

HP BladeSystem c-Class employs ProLiant Onboard Administrator (iLO 2) to configure, update, and

operate individual server blades remotely. The c7000 enclosure includes an Ethernet management

network to aggregate all ProLiant Onboard Administrator (iLO 2) management communications

across the entire enclosure. This management network connects ProLiant Onboard Administrator

(iLO 2) processors to the BladeSystem Onboard Administrator through the BladeSystem Onboard

Administrator tray, as illustrated in Figure 4. The BladeSystem Onboard Administrator provides direct

access to each ProLiant Onboard Administrator (iLO 2) through the enclosure management network.

The BladeSystem Onboard Administrator uses this network to manage pooled enclosure power and

cooling, which results in substantial energy savings over the same number of individual rack-mounted

servers.

The Insight Display, Figure 5, is an ever-ready, enclosure-mounted information exchange device with

access to all BladeSystem Onboard Administrator setup, management, and troubleshooting features. It

is a quick and easy-to-use device that allows technicians to initially configure the enclosure. It also

provides information about the health and operation of the enclosure. The Insight Display is effective

mechanically because it is large enough to see ample information, and it can slide back and forth to

allow access to the power supplies.

Figure 5. Insight Display on the c7000 enclosure

When the c7000 enclosure is initially powered on, the enclosure UID LED and the Insight Display are

illuminated blue to identify the enclosure being configured. The Insight Display automatically launches

an installation wizard to guide the user through the configuration process. After the enclosure is

configured, the Insight Display verifies that there are no installation or configuration errors. The

Installation Wizard turns off the enclosure UID when the installation is complete.

When an error or alert condition is detected, the Insight Display Health Summary screen displays the

total number of error conditions and their locations in the order of error severity (Figure 6). Failure

alerts (if any exist) display first and then caution alerts. Providing this level of diagnostic information

for each enclosure dramatically shortens setup, repair, and troubleshooting time.

For example, in Figure 6 the Insight Display diagnostic screen reports an error in power supply bay

5. The Health Summary screen shows the power supply in bay 5 as red. When the technician selects

View Alert, the Device Error Summary screen indicates the same condition. The Device Error detail in

the third screen shows that the power supply in bay 5 has failed. When the technician selects fix on