HP Xw460c - ProLiant - Blade Workstation Overzicht - Pagina 4

Blader online of download pdf Overzicht voor {categorie_naam} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 35 pagina's. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ook voor HP Xw460c - ProLiant - Blade Workstation: Implementatiehandleiding (35 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Installatiehandleiding (2 pagina's), Handleiding met veelgestelde vragen (14 pagina's), Poster opstellen (9 pagina's), Installatiehandleiding (33 pagina's), Management Handleiding (28 pagina's), Hardware Handleiding (23 pagina's), Gebruikershandleiding (33 pagina's), Handleiding voor optimalisatie (13 pagina's), Beperkte garantie (10 pagina's), Handleiding voor installatie-instructies (10 pagina's), Handleiding voor installatie-instructies (8 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's)

Figure 1. HP BladeSystem c7000 Enclosure – front view

Figure 2. HP BladeSystem c7000 Enclosure – rear view

The c7000 enclosure is10U high and includes a shared, 5-terabit-per-second, high-speed NonStop

midplane for wire-once connection of server blades to network and shared storage. A pooled-power

backplane delivers power and ensures that the full capacity of the power supplies is available to all

server blades and interconnects. The enclosure is available with either a single-phase AC, three-phase

AC, or -48V DC power subsystem to meet the needs of the data center power infrastructure.

The c7000 Enclosure has redundant signal paths between servers and interconnect modules

(Figure 3). The NonStop signal midplane and separate power backplane in the c7000 enclosure

have no active components. Separating the power delivery in the backplane from the high-speed

interconnect signals in the midplane results in minimal thermal stress to the signal midplane.