HP Xw460c - ProLiant - Blade Workstation Gebruikershandleiding - Pagina 11

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HP Xw460c - ProLiant - Blade Workstation. HP Xw460c - ProLiant - Blade Workstation 33 pagina's. Mezzanine card installation instructions for supported hp proliant c-class bladesystem servers
Ook voor HP Xw460c - ProLiant - Blade Workstation: Implementatiehandleiding (35 pagina's), Handleiding voor foutpreventie (12 pagina's), Technisch witboek (12 pagina's), Firmware bijwerken (9 pagina's), Installatiehandleiding (2 pagina's), Handleiding met veelgestelde vragen (14 pagina's), Poster opstellen (9 pagina's), Installatiehandleiding (33 pagina's), Management Handleiding (28 pagina's), Hardware Handleiding (23 pagina's), Overzicht (35 pagina's), Handleiding voor optimalisatie (13 pagina's), Beperkte garantie (10 pagina's), Handleiding voor installatie-instructies (10 pagina's), Handleiding voor installatie-instructies (8 pagina's), Installatie-instructies (4 pagina's), Installatie-instructies (2 pagina's)

HP BIOS Serial Console/EMS Support Settings and Configuration

For detailed information about iLO configurations, refer to the HP Integrated

Lights-Out User Guide on the Documentation CD or to the HP website

(http://www.hp.com/servers/lights-out).

Terminal Emulation Support

BIOS Serial Console supports ANSI and VT100 terminal emulation. Although

the screens displayed in this guide show the ANSI console for clarity, VT100 is

supported by all terminal emulation programs. It should be chosen if the terminal

emulation program is running in VT100 mode. BIOS Serial Console will support

a CLI for RBSU and other embedded ROM utilities on select new servers for

faster, more compatible display with VT100 and compatible terminals. On these

newer servers, BIOS Serial Console support will default to Enabled/VT100/9600

Baud for maximum compatibility with VT100 users. ANSI emulation and the

menu-based RBSU interface may not be supported when BIOS Serial Console is

enabled or in use due to limited compatibility with VT100. The menu-based

RBSU interface will continue to be supported automatically in modes in which

BIOS Serial Console is disabled or not in use. Refer to the HP ROM-Based Setup

Utility User Guide, available on the HP website

(http://www.hp.com/servers/smartstart), for more information on CLI.