Panasonic WVBP550 - CCTV CAMERA Gebruiksaanwijzing - Pagina 28

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic WVBP550 - CCTV CAMERA. Panasonic WVBP550 - CCTV CAMERA 36 pagina's. Super dynamic dsp b/w cameras
Ook voor Panasonic WVBP550 - CCTV CAMERA: Specificaties (2 pagina's)

Pagina afdrukken

Panasonic WVBP550 - CCTV CAMERA Gebruiksaanwijzing

5. The VS gen-lock mode has its own menu for hori-

zontal phase adjustments. When the cable length

of the video output or the gen-lock input is

changed, the horizontal phase must be re-adjust-

ed.

6. The line-lock mode has its own menu for line-lock

vertical phase adjustment. If the camera installa-

tion is relocated, check the vertical phase adjust-

ment again since the AC line phase may be differ-

ent.

6-1. VS Gen-lock Mode (EXT(VS))

1. Move the cursor to the SYNC parameter and

select INT.

2. Connect the coaxial cable for the composite sync

or composite B/W video signal to the gen-lock

input connector.

3. Confirm that the parameter INT changed to EXT

(VS) on the menu.

Caution: The gen-lock input signal should meet

with EIA RS-170 specifications and should not

contain jitter, such as a VCR playback signal ,

as it could disturb synchronization.

** CAM SET UP **

CAMERA ID

OFF

ALC/ELC

ALC

SHUTTER

---

AGC

SENS UP

OFF

SYNC

INT

MOTION DET

OFF

LENS DRIVE

END

SET UP ENABLE

4. After confirming the cursor is on EXT (VS), press

. The phase adjustment menu appears on the

monitor.

** SYNC **

H PHASE

RET

END

5. Move the cursor to H PHASE. The cursor starts

blinking.

6. Supply the video output signal of the camera to be

adjusted and the reference gen-lock input signal

to a dual-trace oscilloscope.

-26-