DIAMOND PACIFIC 100-PTS-105 Gebruikershandleiding - Pagina 2
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DIAMOND PACIFIC 100-PTS-105. DIAMOND PACIFIC 100-PTS-105 4 pagina's. Pixie trim saw
Pagina afdrukkenPIXIE TRIM SAW ATTACHMENT
The Pixie Trim Saw Attachment has three main components:
1.
The blade together with its adaptor.
2.
The table.
3.
The blade guard.
The blade is held onto the adaptor between a fixed flange
and a removable flange that is held against the blade by a socket
head cap-screw.
You can install a six inch diameter blade having either a 1/2
inch hole or a 5/8 inch hole by simply choosing which side of
the removable flange you place against the blade.
Once installed, the blade can be left in place on the adaptor
when the saw attachment is not in use; however it will need to
be stored carefully to avoid bending the blade.
Once the balde has been mounted on the adaptor you can
install your saw attachment in the following steps:
Hold the wheels of your Pixie from turning with your
1.
left hand and unscrew the last wheel of your machine
(together with its adaptor) by using your right hand,
or if need be, by using a wrench. Turn counter clockwise
(as viewed from the right end) as these are normal right
hand threads.
Slide the Pixie pan to the right about five inches (125mm).
2.
INSTRUCTIONS