Diamond Systems Pyxis-MM Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Diamond Systems Pyxis-MM. Diamond Systems Pyxis-MM 15 pagina's. Carrier module for gps, land line modem, and wireless modem
1. DESCRIPTION
The product is a PC/104 carrier board that can be used to install a GPS module, a wireless modem,
and a land line modem. The GPS can be used simultaneously with either modem. Either but not both
modems can be used at one time. The board contains serial port circuitry connected to the PC/104
bus to provide communication links with the add-on modules.
Serial ports
2 RS-232 serial ports based on 16C2850 dual UART
Internal TTL-only signals, no transceivers for direct communication to on board UART to system
bus.
Jumper-selected addresses and interrupts
Interrupt sharing capability
Uses ISP Xilinx 9572 CPLD
Serial port 1 is fixed to GPS primary channel
Serial port 2 can be switched between modems and GPS auxiliary channel
Serial port connections for land line and wireless modems are in parallel since only one is used at
a time.
Serial port connections may also be routed from auxiliary serial port connector on Prometheus or
separate 20-pin header compatible with Emerald-MM-XT; these signals require transceivers to
convert to TTL levels on the board. It must be possible to disable the transceivers when they are
not in use.
GPS
Mounting holes and connector for Trimble Navigation Lassen SK2 module
Dual TTL serial interface
Primary port connects to port 1 of serial port circuit
Auxiliary port can be connected to port 2 of serial port circuit
Antenna connector protrudes beyond right edge of board
Unit mounted on top side of board
Wireless modem
Mounting holes and connector for Cirronet WIT2410M module
Single TTL serial interface connects to port 2 of serial port circuit
"Configure" input wired to ??? (CPLD register bit or DTR)
"Sleep" input wired to ??? (CPLD register bit?)
Antenna connector protrudes beyond right edge of board
Unit mounts on bottom side of board
Land line modem
Mounting holes and connector for Multitech MT5634SMI-ENI (-ITP) module
Single TTL serial interface connects to port 2 of serial port circuit
RJ-11 right-angle connector is mounted at right edge of board and fits within PC/104 height limit
Unit mounts on top side of board
System Features
+5V power from PC/104 bus or from auxiliary connector for standalone operation (any additional
voltages needed are generated on board)
Extended temperature range (-40 to +85
3.550" x 3.775" size , PC/104 compliant
Driver software is not supplied by vendor
o
C) compatible (based on module specs)
765300 - Pyxis User Manual
Page 3