Panasonic et-jpc100be Handleiding voor installatie-instructies - Pagina 6

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Panasonic et-jpc100be. Panasonic et-jpc100be 28 pagina's.

Pagina afdrukken

Product composition

Check that the package contains the following parts. The number enclosed in < > is the quantity.

Ceiling mount bracket <1>

Projector mount bracket <1>

Adapter cover <1>

(ET-JPC100BE: TKFE28802)

(ET-JPC100WE: TKFE28801)

String (6103430249) <1>

Fixer cable tie (TMME244) <1>

Screw, captive washer (M4 x 8) <8>

(ET-JPC100BE: XYN4+F8FJK)

(ET-JPC100WE: 4112055002)

Attention

 After removing the product from the package, dispose of the packing material appropriately.

 If any part is missing, contact the dealer.

 Store small parts appropriately in a place out of the reach of infants and small children.

Note

 Please note that an assembly test has been performed using all parts so this product may have screw

tightening marks around the parts where the ceiling mount bracket and projector mount bracket ﬁ t together.

 The product composition, projector, combination of the product and projector, etc. shown in the illustrations may

differ from the actual equipment.

6 - ENGLISH

This ceiling mount bracket is mounted to the ceiling to

support the entire product.

It has a terminal block for connecting the indoor wiring

for the power supply, and a power cord that is connected

to the projector to supply it with power.

This projector mount bracket is mounted to the projector

and then attached to the ceiling mount bracket.

This adapter cover hides the <AC IN> socket part of the

projector.

This is to prevent the adapter cover from dropping.

This is used for ﬁ x the indoor wiring for the power supply

to the ceiling mount bracket so as to stop tension being

applied.

These are used for the mounting and attaching of the

brackets.