Panasonic PT-56WX51 Gebruiksaanwijzing - Pagina 7

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Panasonic PT-56WX51. Panasonic PT-56WX51 29 pagina's. Color video projection system

Pagina afdrukken
INSTALLATION
Installation
Television Location
Optional Cable
This unit can be used as an entertainment center.
Consult your dealer for available options.
£3
Avoid excessive sunlight or bright lights, including reflections.
[]
Keep away from excessive
heat or moisture.
Inadequate ventilation
may cause internal
component
failure.
[3
Fluorescent
lighting may reduce remote control transmitting
range.
[]
Keep away from magnetic equipment, including motors, fans and external speakers.
Connections
Shielded audio and video cables should be used between components.
For best results:
[]
Use 75-ohm coaxial shielded cables.
C3
Use appropriate
input and output connectors,
that match your component
connectors.
[]
Avoid long cables to minimize interference.
AC Power Supply Cord
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO
WIDE SLOT OF AC OUTLET AND FULLY INSERT. DO NOT USE A PLUG WITH A
RECEPTACLE OR OTHER OUTLET UNLESS THE BLADE CAN BE FULLY
INSERTED TO PREVENT BLADE EXPOSURE.
Polarized plug
PROTECT POWER CORDS FROM BEING WALKED ON, ROLLED OVER, CRIMPED, BENT, OR
PINCHED, PARTICULARLY AT PLUGS, CONVENIENCE RECEPTACLES, AND THE POINT WHERE
THEY EXIT FROM THE APPARATUS.
Cable / Antenna
Connection
For proper reception, either a cable or antenna connection is required.
Cable Connection
Incoming
Cable from
Connect
the cable
supplied
by your local
cable company
to ANT1
connection
on back of television. Select cable mode and ANT1 in SET UP
menu under Preg Chan (Program Channels).
Note:
A cable converter
box may be required
for proper reception.
Check
with
your
local
cable
company
for
compatibility
requirements.
Cable Company
21,
75 Ohm VHF/UHF
on back of PTV
Antenna Connections
For proper reception of VHF/UHF channels, an external antenna is required. For
best reception an outdoor antenna is recommended.
Connect
home antenna
to ANT1 connection
on back of
television. Select TV mode and ANT1 in the SET UP menu
under Prog Chan.
--, _ ,,-- Cable Preset
Cable Mode is preset at the factory.
Antenna users must change to TV Mode and
ANT 1 in the Set Up menu.
Incoming Cable from
Home Antenna
[]